[linux-dvb] Re: Continuity Errors with tda10021 (Re: Distordedvideo with Cinergy1200 DVB-C)

[Anssi Hannula <anssi.hannula@gmail.com>]

wolfgang@leila.ping.de wrote:
> Hi,
> I do not know how to confirm if the values are all correct.
> Unfortunately, I do not have the measurement transmitter at the moment, 
> so I can only say that with a converted signal, our own CU1216-based 
> device runs.
> The parameters we use (taken from data sheet and/or demo software) are:
> LTHR: 0x78, 0x6e, 0x4b, 0x37, 0x2d, 0x23
> MSETH: 0x8c, 0x6e, 0x4b, 0x37, 0x2d, 0x23
> all the others, except for AGCREF that I had to adjust to 110 (0x6E) for 
> QAM256, are the same - but I do not think that LOCKTHR and MSETH could 
> make such a big difference here.
I tested here (QAM128, Tampere Finland) using the exact same 
tda10021-i2c-register values windows driver is using (AGCREF 0x50, LTHR 
0x2d, MSETH 0x2d, PWMREF 0x80, checked with saa7146dump). It did not 
affect the distortions. I think the problem isn't in those.

--
Anssi Hannula