[linux-dvb] Re: please help me with a diseqc switch problem

[belcampo <belcampo@zonnet.nl>]

On Thursday 10 February 2005 15:52, Simon Kenyon wrote:
> On Monday 07 February 2005 14:36, Simon Kenyon wrote:
> > i have a nexus-s (hauppauge) and i have tried with two switches (a 2 way
> > and a 4 way). i cannot get it to switch LNBs. this was initially with
> > mythtv but i cannot get this to work with szap or scan either.
If you use scandvb and use the -s parameter you can switch between your lnbs

Henk Schoneveld
> > disconnect an LNB from the switch, the other one works (this works both
> > ways). with the LNBs directly connected to the nesus, they also both
> > work.
> >
> > i've tried with the driver in 2.6.10 and also with CVS. same difference.
> > what should i do to narrow down the problem? help would be appreciated.
> >
> > regards
> > --
> > simon
> > ps this is gentoo, athlon 1G, 1 nexus, 1 pvr350 and a median frame
> > grabber card. dvb-apps from cvs. two LNBs are pointed at the two astras
> > (19.2 and 28.2)
>
> with regards to which frontend
> here are the relevant lines from /var/log/messages:
>
>
> Feb  6 19:19:35 kilkenny saa7146: register extension 'dvb'.
> Feb  6 19:19:35 kilkenny ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10
> (level, low) -> IRQ 10
> Feb  6 19:19:35 kilkenny saa7146: found saa7146 @ mem e1dca000 (revision 1,
> irq 10) (0x13c2,0x0003).
> Feb  6 19:19:35 kilkenny DVB: registering new adapter
> (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
> Feb  6 19:19:35 kilkenny saa7115: starting probe for adapter
> Technotrend/Hauppauge WinTV Nexus-S rev2.X (0x60000)
> Feb  6 19:19:35 kilkenny adapter has MAC addr = 00:d0:5c:24:aa:98
> Feb  6 19:19:35 kilkenny eth0: Setting full-duplex based on MII#1 link
> partner capability of 45e1.
> Feb  6 19:19:35 kilkenny dvb-ttpci: gpioirq unknown type=0 len=0
> Feb  6 19:19:35 kilkenny dvb-ttpci: info @ card 0: firm f0240009, rtsl
> b0250018, vid 71010068, app 8000261c
> Feb  6 19:19:35 kilkenny dvb-ttpci: firmware @ card 0 supports CI link
> layer interface
> Feb  6 19:19:35 kilkenny dvb-ttpci: Crystal audio DAC @ card 0 detected
> Feb  6 19:19:35 kilkenny saa7146_vv: saa7146 (0): registered device video3
> [v4l2]
> Feb  6 19:19:35 kilkenny DVB: registering frontend 0 (ST STV0299 DVB-S)...
> Feb  6 19:19:35 kilkenny dvb-ttpci: found av7110-0.
>
> hope this helps you to help me
> --
> simon