[vdr] Re: Can't start transfer mode ?!

["Jean-Claude Repetto" <jrepetto@francenet.fr>]

----- Original Message -----
From: "Stephan Duhl" <duhl@gmx.de>
To: <vdr@linuxtv.org>
Sent: Wednesday, January 23, 2002 5:26 PM
Subject: [vdr] Re: Can't start transfer mode ?!


> > > Did you adjust the 'Ca' Parameters to your setup?
> > > The default is '3' (my system has 3 DVB cards...).
> > > If you have _one_ card you have to enter '1' here.
> >
> > Wouldn't it be easier for all newsbies if you would provide
> > a channel.conf with 1 as parameter in the vdr distrib ?
> >
>
> How about to interpret the CA-Value as a bool-Value.
> In the Settings you can specify (new Entry with number as Value) which
card
> has the CA-Interface.
> If CA in channel.conf is "1" the CA-Interface-number is read from the
> settings.
> So everybody can use the channel.conf without editing and the settings
> specify the real card number.
>
> Stephan
>

And if you have several CA-modules ?
Wouldn't be better if the 'Ca' parameter contains one bit per DVB card ?
The value '5' would mean that the channel can be received by the first card
and the third card.
The default channels.conf 'Ca' parameter could be initialized at 0x0F.

Jean-Claude