[vdr] vdr with multiple cards...

[Guido Fiala <gfiala@s.netic.de>]

If vdr starts up it prints only "probing frontend0" but not "frontend1" but 
the driver tells me "2 dvb's detected" - did i miss something obvious?
(i did'nt limit with the -D option and the rw/permissions are not the problem)

Anyway - if i connect the second card at the passthrough of the first 
(detected) card the signal is lost after some seconds, because the LNB 
switches back to horizontal signal (horizontal channels stay visible) - does 
that mean, that the passed on card has that right or is it just a bad signal? 
(i have a 30m cabel from the dish but with one card i have 75-83dB strenght)