[vdr] Re: Hint for setting J2 output to y/c or rgb

["Johannes Schoeller" <schoeller@gmx.at>]

hi thorsten!

take a look into the "Makefile" in /DVB/driver and then
look for insmod $(CARD).o vidmode=2 init_chan=2 pids_off=0;

in that case vidmode=2 means s-video output.
change that to any value you want [1..3]

servus hannes!

Johannes Schoeller
<schoeller@gmx.at>

> Thats what i meant when i wrote "loading the driver"...
> Where can i find these Parameters?
>
> rgds. Thorsten

> > As I know it is only possible to change with the insmod-command
parameter!
> >
> > Gerhard
> >
> > At 10:52 03.07.2002 +0200, you wrote:
> > >hello list!
> > >is it possible to switch the j2 output of a siemens v1.3
> > >via command-line parameter when loading the driver
> > >or will i have to recompile it?