Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] RE : Re: [PATCH] AC3overDVB 0.1.2
I checked the spdif of the J2 connector. Well bad news, the signal is ok
(I made an optical spdif out) and my amplifier decode it but it decode
it as a DolbyPrologic signal. I checked and rechecked wit several DVDs
but my amplifier stay on DolbyPrologic, it never switched to
DolbyDigital nor DTS.
I think that you should test the bitstream out plugin.
I'll test it as soon as I can set it up.
If anyone as a tip to bypass this trouble using the DVB spdif out I'll
test it for you
> > >> Really?
> > >> I thought the DVBs has a standard coax spdif out (talking about a
> > >> rev 2.1 card). And my receiver probably has a standard coax spdif
> > >> in, too. Why not a direct connect?
> > >
> > > The difference is 5.0 V to 0.5 V signal level (Consumer S/P-DIF
> > > versus Professional AES/EBU) ... for the S/P-DIF in of my C-Media
> > > no problem, but for a standard A/V receiver I wouldn't do that.
>... OK for late cards with official S/P-DIF support I guess that the
>signal level around 0.5V
Yes, it is specified in 2.1 Nexus datasheet "S/PDIF output to connect to
So, I would say that all J2/home made cables owners need some circuitery
connect to their home cinema amplifier, while Nexus 2.1+ owners that
official S/PDIF out don't.
I'm directly checking this with Hauppauge support.
MSN Messenger : discutez en direct avec vos amis !
To unsubscribe send a mail to email@example.com with "unsubscribe vdr"
To unsubscribe send a mail to firstname.lastname@example.org with "unsubscribe vdr" as subject.
Main Index |