[vdr] Re: VDR developer version 1.1.24

[nschmidt-nrw@t-online.de (Norbert Schmidt)]

Hi Reinhard,

Am Sonntag, 9. Februar 2003 22:41 schrieben Sie:
> Hi Norbert,
>
> > Hi Reinhard,
> > I did some reorganisation and the funny kernel messages
> > disappear (so far). But there are still the messages
> > concerning the CAM:
>
> Great. Does it run stable now? ;o))

Unfortunately not. If I start vdr with an encrypted channel it
is shown and can be heard for just a minute. Then vdr seems
to hang. But with a little patience you can switch to a FTA 
channel. From that point vdr is very slow and there is no way 
back to an encrypted channel. :-(

>
> > Feb  9 22:21:04 vdr01 vdr[3578]: CAM: retrying to
> > establish connection Feb  9 22:21:07 vdr01 vdr[3578]:
> > ERROR: CAM: Read failed: slot 0, tcid 1
>
> This means your CAM also enters the modified
> CreateConnection routine. Are you getting a picture (i.e.
> is it decrypting)? What happens if you switch a channel up
> and then back (eg 51->52->51) Does it decrypt then?

No. See above.

>
> Now and then I also receive these messages (but it works).
> Usually they appear if I have two CAMs plugged in at once,
> but only one smartcard inserted.
>
> Klaus may have to fine tune it a bit. For now it is
> important that all CAM owners can use their CAMS (incl
> Menu, etc) and that the CAMs run rock stable.

I can enter the cam menu and change f.e. some options. But
here again, vdr hangs after a short time.

>
> Greetz,
> Reinhard
>
>
> ---
> Mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.443 / Virus Database: 248 - Release Date:
> 10.01.2003

It all has not that priority to me since 1.1.20 works just 
fine here. But I would like to be prepared for 1.2.0 ;-).

CU Norbert


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.