[vdr] Re: VDR developer version 1.1.24

[Johannes Lautner <webmaster@weichering-web.de>]

Hi,

i think i get the same errors like Norbert Schmidt and i did this testing 
with 1.1.23 and ci.c (08.02.03)

removing all other cards execpt 1 Siemens DVB 1.3 and my CI PCI 1.4
retested with my other 1.3 (put it in any PCI - Slot)
building a new Kernel
playing around with BIOS-Settings

all times no succes

now i tried 1.1.24 same result 
starting vdr on a FTA channel and after 1 - 4 min vdr emergency exits 
and restarts, but within these minutes i can switch to an PW-channel 
and they gets decrypted also i can enter the cam-menu.

1.1.20.AIO works here nearly perfect

Here is a syslog-part (debug output from ci.c is the same as Norberts)

Feb 10 19:45:56 VDR vdr[2185]: probing /dev/dvb/adapter0/frontend0
Feb 10 19:45:56 VDR vdr[2188]: EIT processing thread started (pid=
2188) - master
Feb 10 19:45:57 VDR vdr[2189]: tuner thread started on device 1 (pid=
2189)
Feb 10 19:45:57 VDR vdr[2185]: probing /dev/dvb/adapter1/frontend0
Feb 10 19:45:57 VDR vdr[2191]: EIT processing thread started (pid=
2191)
Feb 10 19:45:57 VDR vdr[2192]: tuner thread started on device 2 (pid=
2192)
Feb 10 19:45:57 VDR vdr[2185]: probing /dev/dvb/adapter2/frontend0
Feb 10 19:45:57 VDR vdr[2185]: found 2 video devices
Feb 10 19:45:57 VDR vdr[2185]: reading EPG data from /video0/epg.data
Feb 10 19:45:57 VDR vdr[2185]: setting primary device to 1
Feb 10 19:45:57 VDR vdr[2185]: SVDRP listening on port 2001
Feb 10 19:45:57 VDR vdr[2193]: LIRC remote control thread started 
(pid=2193)
Feb 10 19:45:57 VDR vdr[2185]: remote control LIRC - keys known
Feb 10 19:45:57 VDR vdr[2185]: switching to channel 64
Feb 10 19:45:57 VDR vdr[2185]: setting watchdog timer to 60 seconds
Feb 10 19:46:04 VDR vdr[2185]: max. latency time 1 seconds
Feb 10 19:46:07 VDR vdr[2192]: CAM: Irdeto All SE   , 01, 0602, 1702
Feb 10 19:46:28 VDR vdr[2192]: ERROR: CAM: Read failed: slot 0, tcid 
1
Feb 10 19:46:29 VDR vdr[2185]: max. latency time 4 seconds
Feb 10 19:46:33 VDR vdr[2192]: ERROR: CAM: Read failed: slot 0, tcid 
1
Feb 10 19:46:33 VDR vdr[2192]: CAM: retrying to establish connection
Feb 10 19:46:36 VDR vdr[2192]: ERROR: CAM: Read failed: slot 0, tcid 
1

... a few lines deletet

Feb 10 19:47:26 VDR vdr[2192]: CAM: retrying to establish connection
Feb 10 19:47:29 VDR vdr[2192]: ERROR: CAM: Read failed: slot 0, tcid 
1
Feb 10 19:47:29 VDR vdr[2192]: CAM: retrying to establish connection
Feb 10 19:47:30 VDR vdr[2185]: PANIC: watchdog timer expired - 
exiting!

Johannes Lautner

>Hi Norbert,
>
>>> Great. Does it run stable now? ;o))
>
>>Unfortunately not. If I start vdr with an encrypted channel it
>>is shown and can be heard for just a minute. Then vdr seems
>>to hang. But with a little patience you can switch to a FTA 
>>channel. From that point vdr is very slow and there is no way 
>>back to an encrypted channel. :-(
>
>Hmm. I'm a little stumped here. Could you please try
>
>Remove all DVB cards except the 1.3. Connect the CI
>(Rev 1.4, right?) to this card and make sure that the DVB
>isn't sharing interupts (mine does, but just to be sure)
>
>Insert the CAM & Smartcard. Start VDR w/o plugins and
>manually on a FTA channel (just edit the setup.conf for
>current channel). Wait ~ 30 seconds so that VDR is 
>completely done initialising. Switch from a FTA to an
>encrypted channel (don't record anything yet). See how
>long VDR stays stable (don't do anything in VDR ;o))
>If this works, please try to record something. If that *too*
>works you have some kind of hardware config problem.
>
>If that doesn't work either, hmm, well then I am out of
>suggestions .Sorry..........





-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.