[vdr] ARM Crashes.

["Are Årseth" <are@arseth.org>]

Although vdr 1.1.24 with the newest cvs driver is quite stable I still
have regular ARM crashes. I use the regular firmware, not the new one with
CI link layer.

Crashes while I'm watching TV is rare, and when they do happen it usualy
is because I tune to a channel with a bad signal. The channel somehow
hangs the ARM in a loop and vdr gets very sluggish. If I'm lucky a tune to
a good channel will fix thing, but more often the ARM crashes an resets.

The much more annoying craches happen when I'm not watching TV :) Usually
after vdr has been running "idle" for a few hours. When this happens my
logs are filled with:
Feb 13 15:25:50 [kernel] outcommand error 1
Feb 13 15:25:51 [kernel] outcommand error 1
Feb 13 15:26:14 [kernel] outcommand error 1
Feb 13 15:26:15 [kernel] outcommand error 1
Feb 13 15:26:16 [kernel] outcommand error 1
Feb 13 15:26:18 [kernel] commandrequest error 1
Feb 13 15:26:19 [kernel] outcommand error 1
Feb 13 15:26:35 [kernel] outcommand error 1
Feb 13 15:26:36 [kernel] outcommand error 1

And finally dmesg shows: av71100: ARM crashed!

So far I'v never been able to keep vdr running more than 12 hours without
an ARM crash. :(

Does anyone else have these same problems and is there any solution /
workaround for this?

-- 
Mvh. Are Årseth
| are@arseth.org | aaarseth@atmel.com | Tlf: 73 98 49 58 | Mob: 41 00 05 48




-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.