[vdr] Not all RC-5 keys are recognized by the Hauppauge Nexus built-in IR-receiver

[bruce14@gmx.net]

Hello all,

I recently tried to replace the remote control that
came with the Hauppauge Nexus DVB card with
another Philips remote. This remote offers much
more keys and would be perfect to use with VDR.

However I havn't been able to use all of the keys
the new remote has. Especially the Arrow and
Menu-Keys do not work.

When I use a standard LIRC IR receiver everything
worked fine and I was able to use all keys. My lirc.conf
then contains the following codes:

      begin codes
          Red                      0x0000000000001177
          Green                   0x0000000000001172
          Yellow                 0x0000000000001176
          Blue                     0x0000000000001175
          Menu                   0x0000000000000152
          OK                       0x0000000000000157
          Up                       0x0000000000000150
          Down                   0x0000000000000151
          Right                    0x0000000000000156
          Left                     0x0000000000000155
          1                        0x0000000000001141
          2                        0x0000000000001142
          3                        0x0000000000001143
          4                        0x0000000000001144
          5                        0x0000000000001145
          6                        0x0000000000001146
          7                        0x0000000000001147
          8                        0x0000000000001148
          9                        0x0000000000001149
          0                        0x0000000000001140
      end codes

Unfortunately I switched my VDR-box to a
VIA Epia Board which does not support my
LIRC IR receiver, so I would like to get the
Hauppage receiver to work again. What 
strikes me is that all keys ending in 11xx
work find with the built-in receiver whereas
all those ending with 01xx do not. With
those kyes not even a message appears in
/var/log/messages, so it seems that these
codes are somehow filtered in the DVB driver.

Is there any chance to modify the DVB driver
to recognize the whole set of RC-5 codes?

Sorry for the long post and thanks in advance
for any help or ideas how to solve this.

Best regards
- Uwe Glaessner

-- 
+++ GMX - Mail, Messaging & more  http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.