[vdr] Re: xine plugin 0.0.2

To: vdr@linuxtv.org
Subject: [vdr] Re: xine plugin 0.0.2
From: Mateo Anderson <mateo@posta.star.si>
Date: Thu, 18 Sep 2003 17:32:42 +0100
Content-disposition: inline
Content-type: text/plain
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org
Hi,

> what does vdr print to the syslog?

This is the syslog when I run make insmod
for the DVB driver:
--------------------------------------
Sep 19 13:01:31 localhost kernel: Linux video capture interface: v1.00
Sep 19 13:01:32 localhost kernel:
Sep 19 13:01:32 localhost kernel: Technisat SkyStar2 driver loading
Sep 19 13:01:32 localhost kernel: ClaimAdapter: card revision 1
Sep 19 13:01:32 localhost kernel: PCI: Found IRQ 11 for device 00:09.0
Sep 19 13:01:32 localhost kernel: ClaimAdapter: io memory maped at d08f7000
Sep 19 13:01:32 localhost kernel: PidSetGroupPID: pid=0
Sep 19 13:01:32 localhost kernel: PidSetGroupMASK: pid=1fe0
Sep 19 13:01:32 localhost kernel: PidSetStream1PID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetStream2PID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetPmtPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetPcrPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetEcmPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetEmmPID: pid=1fff
Sep 19 13:01:32 localhost kernel: DmaInitDMA: Initializing DMA1 channel
Sep 19 13:01:33 localhost kernel: DmaInitDMA: first subbuffer address = 0x4c8000
0
Sep 19 13:01:33 localhost kernel: DmaInitDMA: subbuffer size = 0x1d600
Sep 19 13:01:33 localhost kernel: DmaInitDMA: second subbuffer address = 0x4c9d6
01
Sep 19 13:01:33 localhost kernel: DmaInitDMA: counter = 0x4c80000
Sep 19 13:01:33 localhost kernel: InitDmaQueue: allocated dma buffer at 0xc4c800
00, length=240640
Sep 19 13:01:33 localhost kernel: DmaInitDMA: Initializing DMA2 channel
Sep 19 13:01:33 localhost kernel: DmaInitDMA: first subbuffer address = 0x479900
0
Sep 19 13:01:33 localhost kernel: DmaInitDMA: subbuffer size = 0x3ac
Sep 19 13:01:33 localhost kernel: DmaInitDMA: second buffer address = 0x47993ad
Sep 19 13:01:33 localhost kernel: InitDmaQueue: allocated dma buffer at 0xc47990
00, length=1880
Sep 19 13:01:33 localhost kernel: skystar2.c: FlexCopII(rev.130) chip found
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2:
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2: tmp2 = 0
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2: tmp3 = 1
Sep 19 13:01:33 localhost kernel: SRAM_testLocation: mask = 20000, addr = 18000
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 20000
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0x4f
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: mask = 0, addr = 10000
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 0
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0x4f
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: mask = 10000, addr = 0
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 10000
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0xa5
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0x5A, read 0x5a
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 10000
Sep 19 13:01:34 localhost kernel: SramDetectForFlex2: sram size = 32K
Sep 19 13:01:34 localhost kernel: DriverInitialize: sram length = 32768, sram ty
pe= 10000
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:34 localhost kernel: skystar2.c: MAC address = 00:d0:d7:03:6e:8d:00
:00
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:34 localhost kernel: skystar2.c: key =
Sep 19 13:01:34 localhost kernel:  b2 00 00 00
Sep 19 13:01:34 localhost kernel:  00 00 00 00
Sep 19 13:01:34 localhost last message repeated 2 times
Sep 19 13:01:34 localhost kernel: DVB: registering new adapter (PCI device 13d0:
2103 (Techsan Electronics Co Ltd)).
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:35 localhost kernel: mt312.c: setup for VP310
Sep 19 13:01:35 localhost kernel: DVB: registering frontend 0:0 (Zarlink MT312).
..

And here is when I run the vdr (with the DEBU_OSD=1)
---------------------------------------------------
Sep 19 13:29:22 localhost vdr[10535]: VDR version 1.2.5 started
Sep 19 13:29:22 localhost vdr[10535]: loading plugin: ./PLUGINS/lib/libvdr-xine.
so.1.2.5
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/setup.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/sources.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/diseqc.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/channels.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/timers.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/svdrphosts.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/ca.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/remote.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/keymacros.conf
Sep 19 13:29:22 localhost kernel: dvb_start_feed: PID=0, type=1
Sep 19 13:29:22 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:22 localhost kernel: AddPID: pid=0
Sep 19 13:29:22 localhost kernel: AddHwPID: pid=0
Sep 19 13:29:22 localhost vdr[10535]: found 1 video device
Sep 19 13:29:22 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:22 localhost vdr[10535]: initializing plugin: xine (0.0.1): Plugin
for "software only" playback using xine.
Sep 19 13:29:22 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:22 localhost vdr[10535]: setting primary device to 2
Sep 19 13:29:22 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:22 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:22 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:22 localhost vdr[10535]: SVDRP listening on port 2001
Sep 19 13:29:22 localhost kernel: AddPID: pid=20
Sep 19 13:29:22 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:22 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:22 localhost vdr[10535]: starting plugin: xine
Sep 19 13:29:22 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:23 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:23 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:23 localhost kernel: RemovePID: pid=20
Sep 19 13:29:23 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:23 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:23 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:23 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:23 localhost kernel: AddPID: pid=20
Sep 19 13:29:23 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:23 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:23 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:23 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:23 localhost kernel: AddPID: pid=18
Sep 19 13:29:23 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:23 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:24 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:24 localhost kernel: RemovePID: pid=18
Sep 19 13:29:24 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:24 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:24 localhost kernel: AddPID: pid=18
Sep 19 13:29:24 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:24 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:24 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:24 localhost kernel: RemovePID: pid=18
Sep 19 13:29:24 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:24 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:24 localhost kernel: AddPID: pid=18
Sep 19 13:29:25 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:25 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:25 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:25 localhost kernel: FLEXI2C_write:
Sep 19 13:29:25 localhost last message repeated 6 times
Sep 19 13:29:25 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:25 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:27 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:29 localhost vdr[10539]: ERROR: no DiSEqC parameters found for chan
nel 2
Sep 19 13:29:29 localhost kernel: dvb_stop_feed: PID=0, type=1
Sep 19 13:29:29 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:29 localhost kernel: RemovePID: pid=0
Sep 19 13:29:29 localhost kernel: RemoveHwPID: pid=0
Sep 19 13:29:29 localhost kernel: dvb_start_feed: PID=0, type=1
Sep 19 13:29:29 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:29 localhost kernel: AddPID: pid=0
Sep 19 13:29:29 localhost kernel: AddHwPID: pid=0
Sep 19 13:29:29 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost vdr[10535]: timer 2 (2 1317-1617 '@TEST-1  ') start
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:29 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:29 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:30 localhost kernel: RemovePID: pid=20
Sep 19 13:29:30 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:30 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:30 localhost kernel: AddPID: pid=20
Sep 19 13:29:30 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:30 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:30 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:30 localhost kernel: RemovePID: pid=20
Sep 19 13:29:30 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:30 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:30 localhost kernel: AddPID: pid=20
Sep 19 13:29:30 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:30 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:31 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:31 localhost kernel: RemovePID: pid=18
Sep 19 13:29:31 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:31 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:31 localhost kernel: AddPID: pid=18
Sep 19 13:29:31 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:31 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:31 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:31 localhost kernel: RemovePID: pid=18
Sep 19 13:29:31 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:31 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:31 localhost kernel: AddPID: pid=18
Sep 19 13:29:31 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:32 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:32 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:32 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:32 localhost kernel: RemovePID: pid=18
Sep 19 13:29:32 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:32 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:32 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:32 localhost kernel: AddPID: pid=18
.................
< A lot of these messages >
.................
Sep 19 13:29:36 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:41 localhost vdr[10535]: not confirmed
Sep 19 13:29:41 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:41 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:42 localhost vdr[10535]: switching to channel 2
Sep 19 13:29:42 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:44 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:46 localhost vdr[10535]: switching to channel 5
Sep 19 13:29:46 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:55 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:55 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:57 localhost vdr[10535]: ERROR: Channel n


> does it use device2 as primary ?

I tried all of them.
By default it is set to 2. But then I get the error messages:
Channel not available!

If I set it to 1, then I don't get this message, but still no
picture.

> does it throw errors from transfer.c when
> only vdr (no xine) is running?

Where can I see those messages?
Should I turn on the debugging? Where?

Ov, today I installed the vdr-1.2.5, but the problems remains.
I also upgraded the DVB driver trough the CVS, but nothing.
Should I use the DVB driver, or dvb-kernel?
I use the DVB.

Regards,
Mateo



_____________________________________________________________
Brezplacen E-mail - http://email.star.si
Brezplacen prostor 100 MB,lastna domena - http://www.slohosting.com


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Follow-Ups:
- [vdr] Re: xine plugin 0.0.2
  - From: Onno <onnok@web.de>
- [vdr] Re: xine plugin 0.0.2
  - From: Reinhard Nissl <rnissl@gmx.de>
Prev by Date: [vdr] Re: System freeze - scanning recordings ...
Next by Date: [vdr] Re: keymap for MD4688 (Was: [Info] Remote control plugin:keymap for remote control MBO-81095)
Previous by thread: [vdr] Easyinput Patch for vdr 1.2.5
Next by thread: [vdr] Re: xine plugin 0.0.2
Index(es):
- Date
- Thread
Home | Main Index | Thread Index