[vdr] Re: xine plugin 0.0.2

To: vdr@linuxtv.org
Subject: [vdr] Re: xine plugin 0.0.2
From: Onno <onnok@web.de>
Date: Fri, 19 Sep 2003 21:11:38 +0100
Content-type: text/plain; charset=us-ascii; format=flowed
In-reply-to: <20030919113230.E33753FDB@sitemail.everyone.net>
References: <20030919113230.E33753FDB@sitemail.everyone.net>
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax)

OK,

i couldn't realy understand all, but your messages like
Sep 19 13:29:41 localhost vdr[10535]: ERROR: Channel not available!
_strongly_ indicate that you use a wrong channels.conf and or
diesq.conf which does not fit the vdr format or the other
config files regarding reception (diseq.conf sources.conf).
so how to you recive?

vdr must set its primary device to 2 since vdr's primary device
is not the main reception device, but the only device with osd user
interaction, thus having no hardware osd (no dxr3 or dvb-fullfeatured)
vdr must use the xine plugin as primary device.

and the error message i refered to will ocour if you
have a running vdr with working reception and loaded xine plugin,
regadless of xine-lib or xine-ui, they are needed if you have it
working that far.
the error comes from the FIFO file device0.vdr and indicated that
no process is reading th data from the fifo, the patched xine will
do that.


Regards Onno

Mateo Anderson schrieb:

Hi,

what does vdr print to the syslog?


This is the syslog when I run make insmod
for the DVB driver:
--------------------------------------
Sep 19 13:01:31 localhost kernel: Linux video capture interface: v1.00
Sep 19 13:01:32 localhost kernel:
Sep 19 13:01:32 localhost kernel: Technisat SkyStar2 driver loading
Sep 19 13:01:32 localhost kernel: ClaimAdapter: card revision 1
Sep 19 13:01:32 localhost kernel: PCI: Found IRQ 11 for device 00:09.0
Sep 19 13:01:32 localhost kernel: ClaimAdapter: io memory maped at d08f7000
Sep 19 13:01:32 localhost kernel: PidSetGroupPID: pid=0
Sep 19 13:01:32 localhost kernel: PidSetGroupMASK: pid=1fe0
Sep 19 13:01:32 localhost kernel: PidSetStream1PID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetStream2PID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetPmtPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetPcrPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetEcmPID: pid=1fff
Sep 19 13:01:32 localhost kernel: PidSetEmmPID: pid=1fff
Sep 19 13:01:32 localhost kernel: DmaInitDMA: Initializing DMA1 channel
Sep 19 13:01:33 localhost kernel: DmaInitDMA: first subbuffer address = 0x4c8000
0
Sep 19 13:01:33 localhost kernel: DmaInitDMA: subbuffer size = 0x1d600
Sep 19 13:01:33 localhost kernel: DmaInitDMA: second subbuffer address = 0x4c9d6
01
Sep 19 13:01:33 localhost kernel: DmaInitDMA: counter = 0x4c80000
Sep 19 13:01:33 localhost kernel: InitDmaQueue: allocated dma buffer at 0xc4c800
00, length=240640
Sep 19 13:01:33 localhost kernel: DmaInitDMA: Initializing DMA2 channel
Sep 19 13:01:33 localhost kernel: DmaInitDMA: first subbuffer address = 0x479900
0
Sep 19 13:01:33 localhost kernel: DmaInitDMA: subbuffer size = 0x3ac
Sep 19 13:01:33 localhost kernel: DmaInitDMA: second buffer address = 0x47993ad
Sep 19 13:01:33 localhost kernel: InitDmaQueue: allocated dma buffer at 0xc47990
00, length=1880
Sep 19 13:01:33 localhost kernel: skystar2.c: FlexCopII(rev.130) chip found
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2:
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2: tmp2 = 0
Sep 19 13:01:33 localhost kernel: SramDetectForFlex2: tmp3 = 1
Sep 19 13:01:33 localhost kernel: SRAM_testLocation: mask = 20000, addr = 18000
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 20000
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0x4f
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: mask = 0, addr = 10000
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 0
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0x4f
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: mask = 10000, addr = 0
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 10000
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0xA5, read 0xa5
Sep 19 13:01:34 localhost kernel: SRAM_testLocation: wrote 0x5A, read 0x5a
Sep 19 13:01:34 localhost kernel: SRAM_init: dwSramType = 10000
Sep 19 13:01:34 localhost kernel: SramDetectForFlex2: sram size = 32K
Sep 19 13:01:34 localhost kernel: DriverInitialize: sram length = 32768, sram ty
pe= 10000
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:34 localhost kernel: skystar2.c: MAC address = 00:d0:d7:03:6e:8d:00
:00
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:34 localhost kernel: skystar2.c: key =
Sep 19 13:01:34 localhost kernel:  b2 00 00 00
Sep 19 13:01:34 localhost kernel:  00 00 00 00
Sep 19 13:01:34 localhost last message repeated 2 times
Sep 19 13:01:34 localhost kernel: DVB: registering new adapter (PCI device 13d0:
2103 (Techsan Electronics Co Ltd)).
Sep 19 13:01:34 localhost kernel: FLEXI2C_read:
Sep 19 13:01:35 localhost kernel: mt312.c: setup for VP310
Sep 19 13:01:35 localhost kernel: DVB: registering frontend 0:0 (Zarlink MT312).
..

And here is when I run the vdr (with the DEBU_OSD=1)
---------------------------------------------------
Sep 19 13:29:22 localhost vdr[10535]: VDR version 1.2.5 started
Sep 19 13:29:22 localhost vdr[10535]: loading plugin: ./PLUGINS/lib/libvdr-xine.
so.1.2.5
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/setup.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/sources.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/diseqc.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/channels.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/timers.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/svdrphosts.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/ca.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/remote.conf
Sep 19 13:29:22 localhost vdr[10535]: loading /home/matej/video/keymacros.conf
Sep 19 13:29:22 localhost kernel: dvb_start_feed: PID=0, type=1
Sep 19 13:29:22 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:22 localhost kernel: AddPID: pid=0
Sep 19 13:29:22 localhost kernel: AddHwPID: pid=0
Sep 19 13:29:22 localhost vdr[10535]: found 1 video device
Sep 19 13:29:22 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:22 localhost vdr[10535]: initializing plugin: xine (0.0.1): Plugin
for "software only" playback using xine.
Sep 19 13:29:22 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:22 localhost vdr[10535]: setting primary device to 2
Sep 19 13:29:22 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:22 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:22 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:22 localhost vdr[10535]: SVDRP listening on port 2001
Sep 19 13:29:22 localhost kernel: AddPID: pid=20
Sep 19 13:29:22 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:22 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:22 localhost vdr[10535]: starting plugin: xine
Sep 19 13:29:22 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:23 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:23 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:23 localhost kernel: RemovePID: pid=20
Sep 19 13:29:23 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:23 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:23 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:23 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:23 localhost kernel: AddPID: pid=20
Sep 19 13:29:23 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:23 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:23 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:23 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:23 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:23 localhost kernel: AddPID: pid=18
Sep 19 13:29:23 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:23 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:24 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:24 localhost kernel: RemovePID: pid=18
Sep 19 13:29:24 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:24 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:24 localhost kernel: AddPID: pid=18
Sep 19 13:29:24 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:24 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:24 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:24 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:24 localhost kernel: RemovePID: pid=18
Sep 19 13:29:24 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:24 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:24 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:24 localhost kernel: AddPID: pid=18
Sep 19 13:29:25 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:25 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:25 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:25 localhost kernel: FLEXI2C_write:
Sep 19 13:29:25 localhost last message repeated 6 times
Sep 19 13:29:25 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:25 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:27 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:29 localhost vdr[10539]: ERROR: no DiSEqC parameters found for chan
nel 2
Sep 19 13:29:29 localhost kernel: dvb_stop_feed: PID=0, type=1
Sep 19 13:29:29 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:29 localhost kernel: RemovePID: pid=0
Sep 19 13:29:29 localhost kernel: RemoveHwPID: pid=0
Sep 19 13:29:29 localhost kernel: dvb_start_feed: PID=0, type=1
Sep 19 13:29:29 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:29 localhost kernel: AddPID: pid=0
Sep 19 13:29:29 localhost kernel: AddHwPID: pid=0
Sep 19 13:29:29 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost vdr[10535]: timer 2 (2 1317-1617 '@TEST-1  ') start
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:29 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:29 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:29 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:30 localhost kernel: RemovePID: pid=20
Sep 19 13:29:30 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:30 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:30 localhost kernel: AddPID: pid=20
Sep 19 13:29:30 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:30 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:30 localhost kernel: dvb_stop_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:30 localhost kernel: RemovePID: pid=20
Sep 19 13:29:30 localhost kernel: RemoveHwPID: pid=20
Sep 19 13:29:30 localhost kernel: dvb_start_feed: PID=20, type=1
Sep 19 13:29:30 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:30 localhost kernel: AddPID: pid=20
Sep 19 13:29:30 localhost kernel: AddHwPID: pid=20
Sep 19 13:29:30 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:30 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:31 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:31 localhost kernel: RemovePID: pid=18
Sep 19 13:29:31 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:31 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:31 localhost kernel: AddPID: pid=18
Sep 19 13:29:31 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:31 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:31 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:31 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:31 localhost kernel: RemovePID: pid=18
Sep 19 13:29:31 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:31 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:31 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:31 localhost kernel: AddPID: pid=18
Sep 19 13:29:31 localhost kernel: AddHwPID: pid=18
Sep 19 13:29:32 localhost kernel: OpenStream: adapter->dma_status=30000000
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: starting dma
Sep 19 13:29:32 localhost kernel: dvb_stop_feed: PID=18, type=1
Sep 19 13:29:32 localhost kernel: CloseStream: dma_status=30000007
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: dma_mask=3
Sep 19 13:29:32 localhost kernel: DmaStartStop0x2102: stoping dma
Sep 19 13:29:32 localhost kernel: RemovePID: pid=18
Sep 19 13:29:32 localhost kernel: RemoveHwPID: pid=18
Sep 19 13:29:32 localhost kernel: dvb_start_feed: PID=18, type=1
Sep 19 13:29:32 localhost kernel: FilterEnableMaskFilter: op=1
Sep 19 13:29:32 localhost kernel: AddPID: pid=18
.................
< A lot of these messages >
.................
Sep 19 13:29:36 localhost kernel: OpenStream: adapter->dma_status=30000007
Sep 19 13:29:41 localhost vdr[10535]: not confirmed
Sep 19 13:29:41 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:41 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:42 localhost vdr[10535]: switching to channel 2
Sep 19 13:29:42 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:44 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:46 localhost vdr[10535]: switching to channel 5
Sep 19 13:29:46 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:55 localhost vdr[10535]: switching to channel 1
Sep 19 13:29:55 localhost vdr[10535]: ERROR: Channel not available!
Sep 19 13:29:57 localhost vdr[10535]: ERROR: Channel n

does it use device2 as primary ?


I tried all of them.
By default it is set to 2. But then I get the error messages:
Channel not available!

If I set it to 1, then I don't get this message, but still no
picture.

does it throw errors from transfer.c when
only vdr (no xine) is running?


Where can I see those messages?
Should I turn on the debugging? Where?

Ov, today I installed the vdr-1.2.5, but the problems remains.
I also upgraded the DVB driver trough the CVS, but nothing.
Should I use the DVB driver, or dvb-kernel?
I use the DVB.

Regards,
Mateo



_____________________________________________________________
Brezplacen E-mail - http://email.star.si
Brezplacen prostor 100 MB,lastna domena - http://www.slohosting.com



--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.

References:
- [vdr] Re: xine plugin 0.0.2
  - From: Mateo Anderson <mateo@posta.star.si>

Prev by Date: [vdr] Re: [ANNOUNCE] calendar-0.1.1
Next by Date: [vdr] Re: Bugreport: Games-Plugin
Previous by thread: [vdr] Re: xine plugin 0.0.2
Next by thread: [vdr] Re: xine plugin 0.0.2
Index(es):
- Date
- Thread

Home | Main Index | Thread Index