[vdr] Re: UPT-Error related with vdr-1.1.27-1.1.28-c.diff

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Martin Holst wrote:
> 
> Hi
> 
> while testing several vdr versions and at last the individual diffs which
> Klaus made available, I recognized that I get the UPT-Error after I've applied
> vdr-1.1.27-1.1.28-c.diff.
> 
> Now the question is, whether it is possible to undo only the changes in that
> diff. Or if it is possible to fragment that diff in smaller diffs. Meanwhile
> I'll to a long term test with vdr-1.1.27-1.1.28-b.diff.
> 
> @Klaus: Do you have any idea, how we can try to fix the UPT-Bug, if it is
> caused by vdr-1.1.27-1.1.28-c.diff? I've tried a simple "cat
> vdr-1.1.27-1.1.28-c.diff | patch -R" on vdr 1.1.28, but that have caused a lot of rejects in
> eit.c, which aren't so easy to fix manual without knowledge of what I'm gonna
> change...
> 
> FYI: I use DVB from 11.06.03.

Do you have a CI with an inserted CAM module in your system?

I'm asking because vdr-1.1.27-1.1.28-c.diff only changes the way the
CA_PMT data is sent to the CAMs. Previously, the same descriptors
were sent to all CAMs, now only those descriptors are sent to each
CAM that are advertised by the CAM as supported.

If you have a CI/CAM: do the UPT errors go away if you remove the CAM(s)?

If you don't have a CI/CAM: I don't see why vdr-1.1.27-1.1.28-c.diff
would introduce the UPT error.

Klaus


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.