Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: OT: RGB Component from J2
Hi
At 11:39 17/04/2004 +0200, Tomas Prybil wrote:
>Fram various sources on the list I could find the pinout for the J2
>connector (http://www2.arnes.si/~mthale1/rgb.html).
>
>Is it a false assumption just to use pin3 for blue, pin 5 for green and
>pin 7 for red? All grounded of course.
You need also to connect the Composite line (pin 1) as it carry the
Syncs; if you set the beamer correctly, it will take the video signals
from the R,G,B inputs, but the syncs from the Composite input. I don't
have/know a beamer, but use the same wiring for my TVs in RGB.
Of course, the DVB driver must be set to RGB mode (from the memory,
'vidmode=1' in insmod parametters).
Best regards:
--
Roberto Deza Asensio
Universidad de Navarra
Data Procesing Center
rdeza@unav.es
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index