Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] Re: final solution to the signalless operation problemfound!! -> testers+RFC required
On Saturday 17 April 2004 16:10, Guido Fiala wrote:
> On Friday 16 April 2004 17:28, Oliver Endriss wrote:
> > Ok, I did some *no-signal* measurements with a rev. 1.3 and a rev. 2.1
> > board. With the 1.3 tuner you can see pulses on tuner pins 24/25/26,
> > while the 2.1 tuner mutes these signals (constant low or high).
>
> Thanks for the test. These pins are the av711x ones i assume?
> As i had a look at the ves-spec and they didn't fit.
> Just wanted to know which pins and registers they correspond in the FE...
No, the pin numbers refer to the BSRV2 tuner box.
There are 15+20=35 pins. Pin 1 is located next to the F-connectors.
Oliver
--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
Home |
Main Index |
Thread Index