[linux-dvb] Twinhan DVB-T PCI
xlntjone at gmail.com
Sat Apr 16 03:41:56 CEST 2005
> Henrik Jönsson wrote:
>> I've got a problem I hope someone can help me whit. I have a Twinhan DTV
>> Ter- CI split but I accidently did break the cabel between the CI-card
>> and the tv-card, anyway thats not the problem. When i do modprobe like
>> modprobe bttv i2c_hw=1 card=0x71
>> modprobe dvb-bt8xx
>> modprobe dst dst_type=1
>> i get this men I do dmesg:
>> Linux video capture interface: v1.00
>> bttv: driver version 0.9.15 loaded
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> bttv: Bt8xx card found (0).
>> ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>> ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 225
>> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 225, latency: 32, mmio:
>> bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID
>> is 1822:0001
>> bttv0: using: Twinhan DST + clones [card=113,insmod option]
>> bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
>> bttv0: using tuner=4
>> bttv0: add subdevice "dvb0"
>> bt878: AUDIO driver version 0.0.0 loaded
>> bt878: Bt878 AUDIO function found (0).
>> ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 17 (level, low) -> IRQ 225
>> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 225, latency: 32, memory:
>> DVB: registering new adapter (bttv0).
>> dst_check_ci: unable to recognize or DTT-CI
>> dst_check_ci please email linux-dvb at linuxtv.org
<http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb> with this
>> DST type : satellite
>> DST type flags : 0x4 symdiv
>> DVB: registering frontend 0 (DST DVB-S)...
>> My problem is now why wont the frontend register it as a DVB-T card.
>> everthing else seems to be right except thoose last lines.
> I think you are using a bit old driver. Can you please update to the
> latest dvb-kernel CVS and let know how it proceeds.. ?
> BTW, which card are you using ? I mean the model number ?
> If it is a new card, not identified by the driver, it would just say
> that ..
Sure i'll try that after this weekend and get back on how it went, i
will asso get back on the model number thing =o) (not home this weekend)
btw im using SuSE 9.2 with kernel 126.96.36.199 the only thing i've done
besides upgrading the kernel is used the bttv-freeze patch.
More information about the linux-dvb