[linux-dvb] Fusion 3 Gold (18ac:d800)

Michael Krufky mkrufky at linuxtv.org
Fri Dec 2 20:37:39 CET 2005


Todd Ignasiak wrote:
> On 11/29/05, CityK <CityK at rogers.com> wrote:
> 
>>Michael Krufky wrote:
>>
>>>CityK wrote:
>>>
>>>
>>>>A few months ago Taylor posted that he had put together a patch for
>>>>the original Fusion 3 Gold (18ac:d800) :
>>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005008.html
>>>>
>>>>I didn't see any or perhaps missed the follow up this card, but I'm
>>>>mildly curious if:
>>>>a) Taylor got it working (and is anyone is using the board)?
>>>>   and
>>>>b) whether or not the it is working with digital cable? ... (although
>>>>its prospects are poor, as discussed in both
>>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005034.html
>>>>and
>>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005035.html)
>>>
>>>Taylor never showed us a patch... I always wondered why.
>>>
>>>Anyhow, based on the DViCO Windows driver INF file, the following
>>>patch should be all that's necessary, unless the board has different
>>>GPIO programming.
>>>
>>>I don't want to apply this unless someone can test it and confirm that
>>>it works.  It is very likely that a new card entry will be needed for
>>>alternate GPIO settings, although the DViCO cards are known to work
>>>with the wrong GPIO settings.  :-/
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>> linux/drivers/media/video/cx88/cx88-cards.c |    4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>>--- v4l-dvb.orig/linux/drivers/media/video/cx88/cx88-cards.c  2005-11-25 05:24:13.000000000 -0500
>>>+++ v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c       2005-11-29 01:06:57.000000000 -0500
>>>@@ -1015,6 +1015,10 @@
>>>              .card      = CX88_BOARD_KWORLD_DVB_T,
>>>      },{
>>>              .subvendor = 0x18ac,
>>>+             .subdevice = 0xd800,
>>>+             .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
>>>+     },{
>>>+             .subvendor = 0x18ac,
>>>              .subdevice = 0xd810,
>>>              .card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
>>>      },{
>>>
>>
>>
>>Michael Krufky wrote:
>>
>>>CityK wrote:
>>>
>>>>Cool.  As you already know, I  picked this last part of the
>>>>discussion up on the DVB list.  Perhaps Taylor or someone else will
>>>>let us know.
>>>
>>>Yes...  I also have information about FusionHDTV II ...  If anybody
>>>out there has one, please let me know, and I'll send you a patch to test.
> 
> 
> I have an older Fusion card.  I'm not sure if it's a Fusion II or III,
>  but it's pre-QAM.    I'll dig it out of the storage box & check it
> out.
> 
> If someone has a patch, or needs other info on the card, let me know.

When you determine exactly which card it is, let me know and provide the 
pci id... i have some nice docs from dvico with almost all the info that 
i need, provided that it uses frontend demod's and tuner already supported.

Glue code is easy.

-Mike



More information about the linux-dvb mailing list