[linux-dvb] tuning failed using skystar 2 rev 2.6D

Johan firdianto johanfirdi at jmn.net.id
Mon Dec 12 08:13:19 CET 2005


hi guys,

I have installed pci skystar 2 rev. 2.6D in my PC.
I have loaded the module named stv0299 , skystar2, dvb_core, etc.
I'am using Fedora Core 2, with native kernel.

Dec 12 19:37:57 localhost kernel: probe_tuner: try to attach to SkyStar2
Dec 12 19:37:57 localhost kernel: drivers/media/dvb/frontends/stv0299.c:
setup for tuner Samsung TBMU24112IMB
Dec 12 19:37:57 localhost kernel: DVB: registering frontend 0:0
(STV0299/TSA5059/SL1935 based)...
Dec 12 19:47:02 localhost kernel: master_xfer: read error !
Dec 12 19:47:02 localhost kernel: message 0: flags=0x0, addr=0x68,
buf=0xa, len=1
Dec 12 19:47:02 localhost kernel: message 1: flags=0x1, addr=0x68,
buf=0x0, len=1
Dec 12 19:48:07 localhost kernel: ACPI: PCI interrupt 0000:00:06.0[A] ->
GSI 10 (level, low) -> IRQ 10
Dec 12 19:48:07 localhost kernel: drivers/media/dvb/b2c2/skystar2.c:
FlexCopIIB(rev.195) chip found
Dec 12 19:48:07 localhost kernel: drivers/media/dvb/b2c2/skystar2.c: the
chip has 38 hardware filters
Dec 12 19:48:07 localhost kernel: DVB: registering new adapter (SkyStar2).
Dec 12 19:48:07 localhost kernel: probe_tuner: try to attach to SkyStar2
Dec 12 19:48:07 localhost kernel: drivers/media/dvb/frontends/stv0299.c:
setup for tuner Samsung TBMU24112IMB
Dec 12 19:48:07 localhost kernel: DVB: registering frontend 0:0
(STV0299/TSA5059/SL1935 based)...

When I tried to tune PAS8, i get error like following.
I have tested the card on windows 2000, the card works well using native
driver. Could you help me to resolve this issue ?. I need to use this card
to using dvb internet.
I appreciate your help.
Thanks.

Johan

[root at localhost scan]# cat PAS-8
# PAS 6/6B/3R at 43.0W
# freq pol sr fec
S 3920000 V 27900000 7/8
S 3920000 V 27900000 3/4
S 3920000 V 27900000 2/3
S 3920000 V 27900000 1/2
S 3920000 V 27900000 3/4

[root at localhost scan]# ./scan -x 0 -l C-BAND PAS-8
scanning PAS-8
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 3920000 V 27900000 7
initial transponder 3920000 V 27900000 3
initial transponder 3920000 V 27900000 2
initial transponder 3920000 V 27900000 1
initial transponder 3920000 V 27900000 3
>>> tune to: 3920:v:0:27900
DiSEqC: switch pos 0, 13V, loband (index 0)
diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 3920:v:0:27900 (tuning failed)
DiSEqC: switch pos 0, 13V, loband (index 0)
diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 3920:v:0:27900
DiSEqC: switch pos 0, 13V, loband (index 0)
diseqc_send_msg:59: DiSEqC: e0 10 38 f0 00 00





More information about the linux-dvb mailing list