[linux-dvb] dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001

Artem artem.bond at gmail.com
Thu Dec 29 01:55:24 CET 2005


On Wednesday 28 December 2005 19:07, you wrote:

With dst_algo I din't cheking becouse they load modue dst automaticly. 

# wget 
"http://83.110.18.182:8000/cgi-bin/hgwebdir.cgi/v4l-algo-test?cmd=archive;node=675755d11eb289dc063d4fc3fcc0e7503bbd5928;type=bz2"
# tar jxfv 
v4l-algo-test\?cmd\=archive\;node\=675755d11eb289dc063d4fc3fcc0e7503bbd5928\;type\=bz2
# cd cgi-bin-hgwebdir-cgi-v4l-algo-test-675755d11eb2/
make 
make install


: Linux video capture interface: v1.00
: bttv: driver version 0.9.16 loaded
: bttv: using 8 buffers with 2080k (520 pages) each for capture
: bttv: Bt8xx card found (0).
: ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 217
: bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 217, latency: 32, mmio: 
0xd3000000
: bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 
1822:0001
: bttv0: using: Twinhan DST + clones [card=113,insmod option]
: bttv0: gpio: en=00000000, out=00000000 in=00d500ff [init]
: input.c: calling hotplug without a hotplug agent defined
: ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-001a/ir0 [bt878 #0 [hw]]
: bttv0: using tuner=4
: bttv0: add subdevice "dvb0"
: bt878: AUDIO driver version 0.0.0 loaded
: bt878: Bt878 AUDIO function found (0).
: ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 217
: bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 217, latency: 32, memory: 
0xd3001000
: DVB: registering new adapter (bttv0).
: dst_get_device_id: Recognise [DST-03T]
:
: DST type flags : 0x2 ts204 0x4 symdiv 0x10 firmware version = 2
: dst_get_mac: MAC Address=[00:08:ca:16:5e:00]
: DVB: registering frontend 0 (DST DVB-S)...

Now It's looks good.

./scan -l C-BAND Yamal201
scanning Yamal201
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 3645000 H 28000000 5
initial transponder 3645000 V 28000000 5
>>> tune to: 3645:h:0:28000
0x0000 0x000b: pmt_pid 0x0064 Gascom -- Kultura dubl-1 (running)
0x0000 0x000c: pmt_pid 0x00c8 Gascom -- Kultura dubl-2 (running)
0x0000 0x000d: pmt_pid 0x012c Gascom -- NTV (running)
0x0000 0x000e: pmt_pid 0x0190 Gascom -- TNT (running)
0x0000 0x000f: pmt_pid 0x01f4 Gascom -- DTV +7 (running)
0x0000 0x0010: pmt_pid 0x0258 Gascom -- TV3 (running)
0x0000 0x0011: pmt_pid 0x02bc Gascom -- Sport (running, scrambled)

I'm typing to config xawtv but they say fontend not locked. 

kernel: dvb_frontend_thread: using FE_ALGO_HW
last message repeated 46 times

Thank. 



More information about the linux-dvb mailing list