[linux-dvb] AVerMedia AverTV DVBT USB1.1 (14AA:0001)

[=?big5?B?sWmr27PT?=]

Dear all.

I tried to get it work on Fedora Core 3, the kernel is linux-2.6.11.10.
Fetching the driver from CVS on Jun 6.

 

dmesg:

usb 3-2: new full speed USB device using uhci_hcd and address 2

dvb_usb_dibusb_common: module license 'unspecified' taints kernel.

dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in cold state, will try to
load a firmware

dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw' to the
'Cypress AN2135'

dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully initialized and
connected.

usbcore: registered new driver DiBcom based USB DVB-T devices (DiB3000M-B
based)

usb 3-2: USB disconnect, address 2

dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.

usb 3-2: new full speed USB device using uhci_hcd and address 3

dvb-usb: found a 'AVerMedia AverTV DVBT USB1.1' in warm state.

dvb-usb: will use the device's hw PID filter.

DVB: registering new adapter (AVerMedia AverTV DVBT USB1.1).

DVB: registering frontend 0 (DiBcom 3000M-B DVB-T)...

dvb-usb: schedule remote query interval to 150 msecs.

dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully initialized and
connected.

usb 3-2: string descriptor 0 read error: -71

usb 3-2: string descriptor 0 read error: -71

hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling...

usb 3-2: USB disconnect, address 3

dvb-usb: AVerMedia AverTV DVBT USB1.1 successfully deinitialized and
disconnected.

usb 3-2: new low speed USB device using uhci_hcd and address 4

usb 3-2: device descriptor read/64, error -71

usb 3-2: device descriptor read/64, error -71

usb 3-2: new low speed USB device using uhci_hcd and address 5

usb 3-2: device descriptor read/64, error -71

usb 3-2: device descriptor read/64, error -71

 

lsmod: evdev                   7552  0

dvb_usb_dibusb_mb       8448  0

dvb_usb_dibusb_common     6020  1 dvb_usb_dibusb_mb

dib3000mc              14848  1 dvb_usb_dibusb_common

dvb_usb                18308  2 dvb_usb_dibusb_mb,dvb_usb_dibusb_common

dvb_core               71208  1 dvb_usb

firmware_class          7296  1 dvb_usb

dib3000mb              12160  1 dvb_usb_dibusb_mb

dib3000_common          2048  2 dib3000mc,dib3000mb

dvb_pll                 6532  3
dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb

i2c_core               17424  3 dvb_usb_dibusb_mb,dvb_usb,dib3000_common

 

After loading firmware, the power and lock LED all shutdown. I am not sure
the firmware work correctly, there seems to be something the matter whit
firmware by dmesg message.

Does anybody got it work well using the firmware?

 

If the firmware is ok, but some required modules that I did not load.

Any suggestions can I do?

Thanks for help.

Steve.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050606/7ac272ee/attachment.htm