[linux-dvb] My Twinhan DVB-T CI won't tune

Allan Stirling Dibblahdvb0042 at pendor.org
Wed Jun 15 10:29:04 CEST 2005


Manu Abraham wrote:

> Allan Stirling wrote:
>
>>
>>>
>>>> Your card has tuning problems due to i2c communication problems. This
>>>> has bee fixed with the bttv patch i posted a while back.. Please do 
>>>> test
>>>> it out whether it solves your communication problems..
>>>>
>>>> This patch can be applied against the bttv in 2.6.11.x.
>>>>
>>>>
>>>> Changelog:
>>>>
>>>> Attached is a patch to bttv which fixes the following problems.
>>>>
>>>>   
>>>
>>>
>>> I tried kernel 2.6.12-rc5, which has the patch, and it didn't work. 
>>> I just
>>> got the same error.
>>>
>>> Einar
>>
>> Also the same issue, this time with a Twinhan DTV Sat-CI (Newly 
>> bought 1030A). Works OK in Windows.
>
> Can you post your messages ?

Just in case this is a new variant:
The card is a 1030A1194100-301, '104029A' is printed on the back of the 
PCB (Silkscreen). On the front is "Ver 4.0" just above the tuner. Inside 
the tuner can is a TSA5059 mounted in the top left quadrant. The tuner 
has KFA015B printed on the PCB. It has a CI interface.

Full logs gzipped in an attachment - But they look as follows:


Jun 15 08:26:22 [kernel] Linux video capture interface: v1.00
Jun 15 08:26:22 [kernel] bttv: driver version 0.9.15 loaded
Jun 15 08:26:22 [kernel] bttv: Bt8xx card found (0).
Jun 15 08:26:22 [kernel] bttv0: using tuner=4
Jun 15 08:26:22 [kernel] bttv0: add subdevice "dvb0"
Jun 15 08:26:22 [kernel] bt878: AUDIO driver version 0.0.0 loaded
Jun 15 08:26:22 [kernel] bt878: Bt878 AUDIO function found (0).
Jun 15 08:26:22 [kernel] DVB: registering new adapter (bttv0).
Jun 15 08:26:22 [kernel] rdc_8820_reset: Resetting DST
Jun 15 08:26:22 [kernel] dst_gpio_outb: mask=[0004], enbb=[0004], 
outhigh=[0000]
Jun 15 08:26:22 [kernel] dst_gpio_outb: mask=[0004], enbb=[0004], 
outhigh=[0004]
Jun 15 08:26:23 [kernel] dst_comm_init: Initializing DST..
Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], 
outhigh=[0000]
Jun 15 08:26:23 [kernel] rdc_reset_state: Resetting state machine
Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], 
outhigh=[0000]
Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], 
outhigh=[0002]
Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], 
outhigh=[0000]
Jun 15 08:26:23 [kernel] read_dst reply is 0xff
Jun 15 08:26:23 [kernel] dst_wait_dst_ready: dst wait ready after 1
Jun 15 08:26:23 [kernel] read_dst reply is 0x0
Jun 15 08:26:23 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], 
outhigh=[0000]
Jun 15 08:26:23 [kernel] dst_get_device_id: Recognise [DSTMCI]
Jun 15 08:26:23 [kernel] DST type : satellite
...
Jun 15 08:27:08 [kernel] Set Frequency = [1023000]
Jun 15 08:27:08 [kernel] rdc_reset_state: Resetting state machine
Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], 
outhigh=[0002]
Jun 15 08:27:08 [kernel] write_dst writing 09 00 03 ff 01 00 55 f0 20 8f
Jun 15 08:27:08 [kernel] write_dst: _write_dst error (err == -5, len == 
0x0a, b0 == 0x09)
Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], 
outhigh=[0000]
Jun 15 08:27:08 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], 
outhigh=[0000]
Jun 15 08:27:08 [kernel] read_dst reply is 0xff
Jun 15 08:27:10 [kernel] dst_wait_dst_ready: dst wait NOT ready after 200
Jun 15 08:27:11 [kernel] Set Frequency = [1023000]
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], 
outhigh=[0002]
Jun 15 08:27:11 [kernel] write_dst writing 09 00 03 ff 01 00 55 f0 20 8f
Jun 15 08:27:11 [kernel] write_dst: _write_dst error (err == -5, len == 
0x0a, b0 == 0x09)
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], 
outhigh=[0000]
Jun 15 08:27:11 [kernel] write_dst: _write_dst error (err == -5, len == 
0x0a, b0 == 0x09)
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0001], 
outhigh=[0000]
Jun 15 08:27:11 [kernel] write_dst: RDC 8820 RESET...
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], 
outhigh=[0000]
Jun 15 08:27:11 [kernel] Set Frequency = [1024375]
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[0002], enbb=[0002], 
outhigh=[0002]
Jun 15 08:27:11 [kernel] write_dst writing 09 00 04 00 01 00 55 f0 20 8d
Jun 15 08:27:11 [kernel] dst_gpio_outb: mask=[ffffffff], enbb=[0000], 
outhigh=[0000]
Jun 15 08:27:11 [kernel] read_dst reply is 0xff
Jun 15 08:27:13 [kernel] dst_wait_dst_ready: dst wait NOT ready after 200



-------------- next part --------------
A non-text attachment was scrubbed...
Name: 12.log.gz
Type: application/x-gzip
Size: 1988 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050615/79aba5af/12.log.bin


More information about the linux-dvb mailing list