[linux-dvb] Terratec Cinergy 1200 DVB-T

[Henrik Jönsson]

Hi
I'm trying to get my terratec dvb-t card to work under SUSE 9.2 with 
kernel 2.6.11.3. But i can't get it to find any channels.
this is how it looks when i do dmesg

Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget dvb /w video in'.
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 217
saa7146: found saa7146 @ mem ffffc20000842000 (revision 1, irq 217) 
(0x153b,0x1157).
DVB: registering new adapter (Terratec Cinergy 1200 DVB-T).
adapter failed MAC signature check
encoded MAC from EEPROM was 
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
KNC1-0: MAC addr = 00:0a:ac:01:a4:ef
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
ciintf_init: CI interface initialised

with ./scan dvb-t/se-Emmaboda > channels.conf
i get this

scanning dvb-t/se-Emmaboda
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 2 0 3 1 2 0
initial transponder 530000000 0 2 0 3 1 2 0
initial transponder 674000000 0 2 0 3 1 2 0
initial transponder 730000000 0 2 0 3 1 2 0
 >>> tune to: 
474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
 >>> tune to: 
474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
 >>> tune to: 
530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
 >>> tune to: 
674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
 >>> tune to: 
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
 >>> tune to: 
730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE 
(tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

is there anyone out there that can help me?
// Henrik