[linux-dvb] Pinnacle 310i

bardinov at utt.fr bardinov at utt.fr
Tue Nov 15 10:52:13 CET 2005


Hi,

I try to install the pinnacle 310i but without success.
I have debian with kernel 2.6.14.2
I do modprobe saa7134 card=50 tuner=3
$ dmesg
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:01:07.0, rev: 208, irq: 177, latency: 32, mmio:
0xf5001000
saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 300i DVB-T + PAL
[card=50,insmod option]
saa7133[0]: board init: gpio is 600c000
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
saa7133[0]: dsp access wait timeout [bit=WRR]
tuner 0-004b: chip found @ 0x96 (saa7133[0])
saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c 43 46 ff ff
saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2
saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 28 bf a8
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0

modprobe saa7134-dvb gives me that error in dmesg:
saa7133[0]: pinnacle 300i dvb setup
saa7133[0]: frontend initialization failed

I can't make work analog and digital tv.
I only have balck screen for all analog channels with tvtime, xawtv or mplayer.

Could you help me to have at least analog tv working?

thanks

vince

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.




More information about the linux-dvb mailing list