[linux-dvb] "dvb_bt8xx: Unknown symbol dst_attach" with latest CVS

Michael Krufky mkrufky at m1k.net
Tue Nov 29 14:39:17 CET 2005


Stefan Hußfeldt wrote:

>Hello,
>
>when i try the latest CVS driver with my AverMedia 771 i got the
>following error:
>
>modprobe bttv
>modprobe -v dvb-bt8xx
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/lgdt330x.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/or51211.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/cx24110.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/sp887x.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/dvb-pll.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/bt878.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/mt352.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/frontends/nxt6000.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/dvb-core/dvb-core.ko 
>insmod /lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko 
>FATAL: Error inserting dvb_bt8xx (/lib/modules/2.6.14/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>
>|Nov 29 10:57:44 zaphod kernel: Linux video capture interface: v1.00
>|Nov 29 10:57:44 zaphod kernel: bttv: driver version 0.9.16 loaded
>|Nov 29 10:57:44 zaphod kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
>|Nov 29 10:57:44 zaphod kernel: bttv: Bt8xx card found (0).
>|Nov 29 10:57:44 zaphod kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
>|Nov 29 10:57:44 zaphod kernel: bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 12, latency: 32, mmio: 0xda000000
>|Nov 29 10:57:44 zaphod kernel: bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771
>|Nov 29 10:57:44 zaphod kernel: bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected]
>|Nov 29 10:57:44 zaphod kernel: bttv0: gpio: en=00000000, out=00000000 in=00df1cdf [init]
>|Nov 29 10:57:44 zaphod kernel: bttv0: using tuner=4
>|Nov 29 10:57:44 zaphod kernel: bttv0: registered device video0
>|Nov 29 10:57:44 zaphod kernel: bttv0: registered device vbi0
>|Nov 29 10:57:44 zaphod kernel: bttv0: PLL: 28636363 => 35468950 . ok
>|Nov 29 10:57:44 zaphod kernel: bttv0: add subdevice "remote0"
>|Nov 29 10:57:44 zaphod kernel: bttv0: add subdevice "dvb0"
>|Nov 29 10:57:44 zaphod udev[8109]: creating device node '/dev/vbi0'
>|Nov 29 10:57:44 zaphod udev[8108]: creating device node '/dev/video0'
>|Nov 29 10:57:53 zaphod kernel: bt878: AUDIO driver version 0.0.0 loaded
>|Nov 29 10:57:53 zaphod kernel: bt878: Bt878 AUDIO function found (0).
>|Nov 29 10:57:53 zaphod kernel: ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [LNK1] -> GSI 12 (level, low) -> IRQ 12
>|Nov 29 10:57:53 zaphod kernel: bt878(0): Bt878 (rev 17) at 01:0a.1, irq: 12, latency: 32, memory: 0xda001000
>|Nov 29 10:58:07 zaphod kernel: dvb_bt8xx: Unknown symbol dst_attach
>|Nov 29 10:58:07 zaphod kernel: dvb_bt8xx: Unknown symbol dst_ca_attach
>
>CVS from 26.11.2005 (before merge) works fine.
>
>Any hints?
>
>  
>
Please refresh your sources and try again -- I had to separate DST from 
the DVB-BT8XX build before we merged the trees, and I forgot to revert 
it after they were merged... fixed now.

Cheers,
Michael Krufky



More information about the linux-dvb mailing list