[linux-dvb] hi,a very simply ques tion about DVBsnoop

[allanye at 163.com]

Dear Christophe,

I try to get NIT information like below by using DVBsnoop.

---------------------------------------------------------------
PID:  16 (0x0010)
NIT-decoding....
Table_ID: 64 (0x40)  [= network_information_section - actual network]
section_syntax_indicator: 1 (0x01)
reserved_1: 1 (0x01)
reserved_2: 3 (0x03)
Section_length: 279 (0x0117)
Network_ID: 1 (0x0001)  [= Astra Satellite Network 19.2E / Satellite / SES]
reserved_3: 3 (0x03)
Version_number: 20 (0x14)
Current_next_indicator: 1 (0x01)
Section_number: 1 (0x01)
Last_Section_number: 1 (0x01)
reserved_4: 15 (0x0f)
Network_descriptor_length: 0 (0x0000)

reserved_5: 15 (0x0f)
Transport_stream_loop_length: 266 (0x010a)
    
    Transport_stream_ID: 1279 (0x04ff)
    Original_network_ID: 1 (0x0001)  [= Astra Satellite Network 19,2°E | Société Européenne des Satellites]
    reserved_1: 15 (0x0f)
    Transport_descriptor_length: 13 (0x000d)
        
        DVB-DescriptorTag: 67 (0x43)  [= satellite_delivery_system_descriptor]
        Descriptor_length: 11 (0x000b)
        Frequency: 18453072 (=  11.99250 GHz)
        Orbital_position: 402 (=  19.2)
        West_East_flag: 1 (0x01)  [= EAST]
        Polarisation: 0 (0x00)  [= linear - horizontal]
        Modulation (Sat): 1 (0x01)  [= QPSK]
        Symbol_rate: 2576384 (=  27.5000)
        FEC_inner: 3 (0x03)  [= 3/4 conv. code rate]
	
	......
 

------------------------------------------------------------------------------------
I try to use this command as below:
/dvbsnoop -if test.ts  -n 500 0x10

but I didn't get the similar result like example 

what kind't command should I input to get the similar result like example?
I can sure that the test.ts file has NIT information.

Thanks
Ye Hui
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20061206/b3c90a07/attachment.htm