[linux-dvb] Problems using gnutv and zap.

Morgan Tørvolt morgan.torvolt at gmail.com
Thu Dec 7 14:28:12 CET 2006


Hi

I am trying to get my CA stuff working. I have a TT1500 with CA
adapter. I use an Irdeto cam.

I have tried just about everything now, with the same results. gnutv
and zap both give me this:

Using frontend "ST STV0299 DVB-S", type DVB-S
status SCVYL | signal ac80 | snr c4f8 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
<-this is where it hangs, and i press ctrl+c->
en50221_stdcam_llci_poll: Error reported by stack:-1

This happens on every channel, also ones that are not encrypted.

adding "-out file test.ts" works on what I have tested on Hotbird, but
my card is for Showtime channels on Nilesat (7W). On Nilesat it seems
that all the output I get is PAT, PMT or some other table, as the
output is repetitive over a small ammount of data.

I have downloaded the latest dvb-apps and the latest v4l-dvb drivers.
I had to change suspend.h to freezer.h in dvb_frontend.c to get it to
work, but it seems to work nicely now.

dmesg:

saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:01:06.0 disabled
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'budget_ci dvb'.
ACPI: PCI interrupt for device 0000:01:08.0 disabled
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level,
low) -> IRQ 18
saa7146: found saa7146 @ mem ffffc20010610000 (revision 1, irq 18)
(0x13c2,0x1017).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget/S-1500 PCI).
adapter has MAC addr = 00:d0:5c:07:99:0b
input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input7
budget_ci: CI interface initialised
DVB: registering frontend 0 (ST STV0299 DVB-S)...
dvb_ca adapter 0: DVB CAM detected and initialised successfully


I get a new line exacly like the last one every time i use zap or gnutv.
If there is any debug output I can enable somehow, or anything like
that,, I would love to try it.

Thanks

-Morgan-



More information about the linux-dvb mailing list