[linux-dvb] Hauppauge WinTV-HVR 900 hybrid tv stick problems...

Markus Rechberger mrechberger at gmail.com
Fri Dec 8 08:46:41 CET 2006


On 12/8/06, Alberto Segura <ass06 at ya.com> wrote:
> Hi all!
>
>    Recently I have bought an Wintv HVR 900 usb 2.0 stick for watching tv
> on my ubuntu edgy (2.6.17-10-386). The card is supposed to have the
> ability to tune analog and dvb channels, but, at the moment, no way...

---
http://linuxtv.org/v4lwiki/index.php/Em2880#Devices
Hauppauge HVR 900 M/R: 65018/B2C0 (Sticker on the device, only
analogue TV is supported at the moment)
---
> [17179613.980000] tveeprom 5-0050: Hauppauge model 65018, rev B2C0,
> serial# 1023804
---

- no comment -

Markus

>  I think that the card is supported in the wiki, and here is some useful
> information that my linux gives me about it:
>
> * *lsusb*
> Bus 003 Device 002: ID 2040:6502 Hauppauge
>
> * *xawtv -hwscan*
> This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386)
> looking for available devices
> port 245-245                            [ -xvport 245 ]
>    type : Xvideo, video overlay
>    name : video4linux
>
> port 246-246
>    type : Xvideo, image scaler
>    name : NV17 Video Texture
>
> port 247-278
>    type : Xvideo, image scaler
>    name : NV05 Video Blitter
>
> /dev/video0: OK                         [ -device /dev/video0 ] ------>
> /Another saa7134 pci tuner in my pc (not tunning too)/
>    type : v4l2
>    name : Pinnacle PCTV Stereo (saa7134)
>    flags: overlay capture tuner
>
> /dev/video1: OK                         [ -device /dev/video1 ] ------>
> /The card  I want to make work!!!/
>    type : v4l2
>    name : Hauppauge WinTV HVR Rev. 1.2
>    flags:  capture tuner
>
> * *dmesg*
> [17179613.440000] usb 3-6: new high speed USB device using ehci_hcd and
> address 2
> [17179613.576000] usb 3-6: configuration #1 chosen from 1 choice
> [17179613.576000] em28xx new video device (2040:6502): interface 0,
> class 255
> [17179613.576000] em28xx #0: Alternate settings: 8
> [17179613.576000] em28xx #0: Alternate setting 0, max size= 0
> [17179613.576000] em28xx #0: Alternate setting 1, max size= 0
> [17179613.576000] em28xx #0: Alternate setting 2, max size= 1448
> [17179613.576000] em28xx #0: Alternate setting 3, max size= 2048
> [17179613.576000] em28xx #0: Alternate setting 4, max size= 2304
> [17179613.576000] em28xx #0: Alternate setting 5, max size= 2580
> [17179613.576000] em28xx #0: Alternate setting 6, max size= 2892
> [17179613.576000] em28xx #0: Alternate setting 7, max size= 3072
> [17179613.948000] tuner 5-0061: chip found @ 0xc2 (em28xx #0)
> [17179613.948000] attach inform (default): detected I2C address c2
> [17179613.956000] attach_inform: eeprom detected.
> [17179613.980000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0
> 12 5c 03 82 1e 6a 18
> [17179613.980000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00
> 00 00 00 00 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8
> 00 00 00 5b e0 00 00
> [17179613.980000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10
> 01 01 01 00 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00
> 00 18 03 34 00 30 00
> [17179613.980000] em28xx #0: i2c eeprom 70: 32 00 37 00 35 00 35 00 35
> 00 36 00 34 00 34 00
> [17179613.980000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e
> 00 54 00 56 00 20 00
> [17179613.980000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39
> 00 30 00 30 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4
> 78 23 fa fd d0 28 89
> [17179613.980000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01
> 01 20 77 00 40 3c 9f
> [17179613.980000] em28xx #0: i2c eeprom c0: 0f f0 74 02 01 00 01 79 60
> 00 00 00 00 00 00 00
> [17179613.980000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4
> 78 23 fa fd d0 28 89
> [17179613.980000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01
> 01 20 77 00 40 3c 9f
> [17179613.980000] em28xx #0: i2c eeprom f0: 0f f0 74 02 01 00 01 79 60
> 00 00 00 00 00 00 00
> [17179613.980000] EEPROM ID= 0x9567eb1a
> [17179613.980000] Vendor/Product ID= 2040:6502
> [17179613.980000] AC97 audio (5 sample rates)
> [17179613.980000] 500mA max power
> [17179613.980000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000
> [17179613.980000] tveeprom 5-0050: Hauppauge model 65018, rev B2C0,
> serial# 1023804
> [17179613.980000] tveeprom 5-0050: tuner model is Xceive XC3028 (idx
> 120, type 71)
> [17179613.980000] tveeprom 5-0050: TV standards PAL(B/G) PAL(I)
> PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
> [17179613.980000] tveeprom 5-0050: audio processor is None (idx 0)
> [17179613.980000] tveeprom 5-0050: has radio
> [17179613.984000] Tuner: setting up tuner core extension for: Xceive
> 3028 Tuner
> [17179613.984000] Loading base firmware: xc3028_8MHz_init0.i2c.fw
> [17179615.164000] Loading specific dtv settings: xc3028_DTV8_2633.i2c.fw
> [17179615.224000] xc3028-tuner.c: sending extra call for DVB-T
> [17179615.224000] Loading base firmware: xc3028_init0.i2c.fw
> [17179616.304000] Loading default analogue TV settings:
> xc3028_BG_PAL_A2_A.i2c.fw
> [17179617.500000] em28xx-video.c: requesting em28xx-audio!
> [17179617.504000] em28xx #0: V4L2 VBI device registered as /dev/vbi1
> [17179617.504000] em28xx #0: V4L2 device registered as /dev/video1
> [17179617.504000] em2880-dvb.c: DVB Init
> [17179617.504000] em2880-dvb.c: unsupported device
> [17179617.504000] em2880-dvb.c: failed initializing zl10353 DVB-T
> demodulator
> [17179617.504000] em2880-dvb.c: retrying with mt352 DVB-T demodulator
> [17179617.504000] FIXME: Write failed, backtrace:
> [17179617.504000] ===============================
> [17179617.504000] 7f
> [17179617.504000] ================================
> [17179617.504000] mt352_read_register: readreg error (reg=127, ret==-19)
> [17179617.504000] em2880-dvb.c: no luck with mt352 demodulator, not
> attaching em2880-dvb
> [17179617.504000] em2880-dvb.c: DVB-T demodulator not reachable, did you
> try "modprobe em28xx device_mode=1"
> [17179617.504000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2
>
> ... For installing it, I download mercurial from ubuntu repository,
> download the latest driver from Markus Rechberger (linuxtv) and extract
> firmware_3.tgz in /lib/firmware, I have also em28xx device_mode=1 and
> em2880-dvb in /etc/modules for loading at boot...
>
>    As I told you before I am not able to tune analog or dvb channels
> using tvtime-scanner -d /dev/video1 (tvtime) or scantv -c /dev/video1
> (xawtv)
>
>    I hope someone can give me ideas.
>
>   Thanks in advance.
>
> Alberto.
>
>
>
> 		
> ______________________________________________
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
> http://es.voice.yahoo.com
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>


-- 
Markus Rechberger



More information about the linux-dvb mailing list