[linux-dvb] Pinnacle PCTV Hybrid Pro Card (310c)

Jyp j.y.p at wanadoo.fr
Fri Dec 29 22:17:06 CET 2006


Hi,

Distro Ubuntu 6.10
Kernel 2.6.17 ubuntu
Drivers cxXXXX last version

I have not son TV analog et radio (but /dev/radio0 is present)
Impossible to scan channel TNT

jyp at jyp-laptop:~$ ls -l /dev/radio*
lrwxrwxrwx 1 root root       6 2006-12-29 22:01 /dev/radio -> radio0
crw-rw---- 1 root video 81, 64 2006-12-29 22:01 /dev/radio0
jyp at jyp-laptop:~$ ls -l /dev/video*
lrwxrwxrwx 1 root root      6 2006-12-29 22:01 /dev/video -> video0
crw-rw---- 1 root video 81, 0 2006-12-29 22:01 /dev/video0
jyp at jyp-laptop:~$ ls -l /dev/dvb*
ls: /dev/dvb*: Aucun fichier ou répertoire de ce type

jyp at jyp-laptop:~$ scan -n -o zap -p 
/usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Lille > 
~/.xine/channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Lille
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No 
such file or directory

[17182453.792000] Tuner: registering extension (Xceive 3028 Tuner)
[17182505.360000] pccard: CardBus card inserted into slot 0
[17182505.360000] PCI: Failed to allocate mem resource 
#0:1000000 at 46000000 for 0000:07:00.2
[17182505.748000] Linux video capture interface: v2.00
[17182505.896000] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[17182505.896000] cx88[0]: can't get MMIO memory @ 0x0
[17182505.896000] CORE cx88[0] No more PCI ressources for subsystem: 
12ab:1788, board: UNKNOWN/GENERIC
[17182505.896000] cx88-mpeg driver manager: probe of 0000:07:00.2 failed 
with error -22
[17182505.904000] cx2388x v4l2 driver version 0.0.6 loaded
[17182505.904000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[17182505.904000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, 
low) -> IRQ 169
[17182505.904000] CORE cx88[0]: subsystem: 12ab:1788, board: Pinnacle 
Hybrid PCTV [card=57,autodetected]
[17182505.904000] TV tuner 71 at 0xc2, Radio tuner 71 at 0xc2
[17182505.916000] cx2388x alsa driver version 0.0.6 loaded
[17182506.036000] tuner 1-0061: chip found @ 0xc2 (cx88[0])
[17182506.044000] Tuner: setting up tuner core extension for: Xceive 
3028 Tuner
[17182506.044000] ERROR TUNER TYPE NOT SUPPORTED (130)
[17182506.120000] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 169, 
latency: 0, mmio: 0x44000000
[17182506.120000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[17182506.128000] cx88[0]/0: registered device video0 [v4l2]
[17182506.128000] cx88[0]/0: registered device vbi0
[17182506.128000] cx88[0]/0: registered device radio0
[17182506.128000] Loading base firmware: xc3028_init0.i2c.fw
[17182506.172000] Switching to Analogue TV
[17182507.168000] cx88_gpio_write: 192 - 0
[17182509.372000] Loading default analogue TV settings: 
xc3028_BG_PAL_A2_A.i2c.fw
[17182509.416000] xc3028_set_std, Loading specific configuration for 
requested mode xc3028_MN_NTSCPAL_A2.i2c.fw
[17182509.472000] PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
[17182509.472000] ACPI: PCI Interrupt 0000:07:00.1[A] -> GSI 21 (level, 
low) -> IRQ 169
[17182509.472000] PCI: Setting latency timer of device 0000:07:00.1 to 64
[17182509.472000] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards

JypX





More information about the linux-dvb mailing list