[linux-dvb] VP702x is now working

Dave Tapuska dftapusk at yahoo.com
Fri Jun 9 04:25:02 CEST 2006


I just did a rmmod for dvb-usb-vp702x, dvb-usb,
dvb-core and then an inmod and now I have gotten
further

usbcore: registered new driver dvb-usb-vp702x
usb 5-1: new high speed USB device using ehci_hcd and
address 13
dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0
(VP7021)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file
'dvb-usb-vp702x-02.fw'
dvb-usb: reenum check: 2
dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0
(VP7021)' in warm state (or no re-enumeration).
dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
DVB: registering new adapter (TwinhanDTV StarBox DVB-S
USB2.0 (VP7021)).
dvb-usb: MAC address: 00:00:00:00:00:00
vp702x: usb out operation failed. (-71)
vp702x: usb out operation failed. (-71)
vp702x: usb in operation failed. (-71)
dvb-usb: no frontend was attached by 'TwinhanDTV
StarBox DVB-S USB2.0 (VP7021)'
input: IR-receiver inside an USB DVB receiver as
/class/input/input6
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021)
successfully initialized and connected.
usb 5-1: USB disconnect, address 13
dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021)
successfully deinitialized and disconnected.
usb 5-1: new high speed USB device using ehci_hcd and
address 14
dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0
(VP7021)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file
'dvb-usb-vp702x-02.fw'
dvb-usb: reenum check: 2
dvb-usb: found a 'TwinhanDTV StarBox DVB-S USB2.0
(VP7021)' in warm state (or no re-enumeration).
dvb-usb: will pass the complete MPEG2 transport stream
to the software demuxer.
DVB: registering new adapter (TwinhanDTV StarBox DVB-S
USB2.0 (VP7021)).
dvb-usb: MAC address: 00:00:00:00:00:00
vp702x: system string: USB702X7
DVB: registering frontend 0 (Twinhan DST-like frontend
(VP7021/VP7020) DVB-S)...input: IR-receiver inside an
USB DVB receiver as /class/input/input7
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: TwinhanDTV StarBox DVB-S USB2.0 (VP7021)
successfully initialized and connected.
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)
vp702x: usb in operation failed. (-110)



--- Dave Tapuska <dftapusk at yahoo.com> wrote:

> Ok, I pulled down the source with your match in it
> and
> I did the following:
> 
> make config 
> answered n to a bunch of things (pretty much just
> wanted some video decoders, dvb-core, dvb-usb and
> the
> vp702x)
> make 
> and then make install.
> 
> Now I am getting an error reported by dmsg. What am
> I
> doing wrong ?
> 
> usb 5-1: new high speed USB device using ehci_hcd
> and
> address 2
> dvb_usb_vp702x: disagrees about version of symbol
> dvb_usb_device_init
> dvb_usb_vp702x: Unknown symbol dvb_usb_device_init
> dvb_usb_vp702x: disagrees about version of symbol
> dvb_usb_device_init
> dvb_usb_vp702x: Unknown symbol dvb_usb_device_init
> 
> 
> --- Patrick Boettcher <patrick.boettcher at desy.de>
> wrote:
> 
> > Hi,
> > 
> > finally I was able to find the clue to make the
> > StarBox work .  Sorry for 
> > taking so long, but I was too busy doing other
> > things.
> > 
> > However the VP702x-firmware is not so simple to
> > program - there are a lot 
> > of traps which are very easy to step into - and I
> > took them all. Working 
> > on it can be described as in Indy3 the second
> > exercise in the temple he 
> > gets the Gral: but without knowing how to write
> > "Jehova" .
> > 
> > It took several weekends and since Monday I'm
> using
> > the box daily with 
> > VDR. No problems so far with Astra 19.2
> > 
> > It can be found here, for all of you who want to
> > test.
> > 
> > http://linuxtv.org/hg/~pb/v4l-dvb.vp702x
> > 
> > Most likely the driver will only deliver data,
> when
> > you use it together 
> > with the StarBox2: According to Twinhan only with
> > that revision you can 
> > receive the whole TS (so disabling the PID
> filter).
> > The older revision has 
> > a PID filter of 8 entries - I had some problem
> when
> > using it with VDR so 
> > this PID filtering mechanism is currently not
> > activated. Everything for 
> > that is inside the vp702x.c - in case someone
> wants
> > to work on that and 
> > can do something without breaking support for the
> > StarBox2.
> > 
> > I couldn't test diseqc, too, but the code is
> inside
> > vp702x-fe.c . 
> > 
> > The firmware has also changed, during this day I
> > will put the new one to 
> > http://www.thadathil.net/dvb/fw/ .
> > 
> > best regards,
> > Patrick.
> > 
> > --
> >   Mail: patrick.boettcher at desy.de
> >   WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/
> > 
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb at linuxtv.org
> >
>
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
>
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



More information about the linux-dvb mailing list