[linux-dvb] MT2060 and DibCom3000P on USB stick

Patrick Boettcher patrick.boettcher at desy.de
Wed Mar 22 19:28:57 CET 2006


On Wed, 22 Mar 2006, Markus Rechberger wrote:

> Interesting that I have the same problem...
>
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 719000000 0 1 9 3 1 2 0
>>>> tune to: 719000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
> WARNING: filter timeout pid 0x0011
> WARNING: filter timeout pid 0x0000
> WARNING: filter timeout pid 0x0010
> dumping lists (0 services)
> Done.

Same symptom, totally different reason. The error just means, that there 
is no data input in the demuxer. In your case I rather think there is 
something wrong with the demod setup. Output mode?

Also make sure that you have MPEG-DATA lock (FEC).

regards,
Patrick.

--
   Mail: patrick.boettcher at desy.de
   WWW:  http://www.wi-bw.tfh-wildau.de/~pboettch/



More information about the linux-dvb mailing list