[linux-dvb] Kworld DVB-S 100 not setting up /dev/dvb (DiSEqC working?)

Todd nospam at tippyturtle.com
Sat Mar 25 00:03:32 CET 2006


1.  Ignore my blackbird comment, i have 2 kworld cards (can't beat the 
price) in that machine, I confused the 2.
2.  Building these pieces as Modules fixed my previous no /dev/dvbX issues.
3.  I can't seem to get the DiSEqC switching to work.  I seem to remember a 
discussion on this.  Was this issue ever resolved or is there some type of 
trick to this?

BTW, I am using Kernel source 2.6.16 (no patches/CVS).

Thanks in advance,
Todd

----- Original Message ----- 
From: "Todd" <nospam at tippyturtle.com>
To: "Garnet MacPhee" <garnet at signalpeak.net>; <linux-dvb at linuxtv.org>
Sent: Tuesday, March 21, 2006 2:42 PM
Subject: Re: [linux-dvb] Kworld DVB-S 100 not setting up /dev/dvb


>I am having the same issue.  Was there a resolution to this?  I am running 
>Linux Kernel 2.6.16.  The other interfaces are connect up (Video0/1 and VBI 
>0).
>
> Side note:  I added  ".blackbird      = 1," (since it is) and this was 
> detected correctly as well.  I haven't had time to fully test the 
> functionality of the MPEG2 capture yet.
>
> Todd
>
> ----- Original Message ----- 
> From: "Garnet MacPhee" <garnet at signalpeak.net>
> To: <linux-dvb at linuxtv.org>
> Sent: Tuesday, March 14, 2006 1:12 PM
> Subject: [linux-dvb] Kworld DVB-S 100 not setting up /dev/dvb
>
>
>>I have been unable to get the /dev/dvb entries set up for my Kworld DVB-S 
>>100. I have tried several recent versions of the kernel, the latest being 
>>2.6.16-rc6. I am running Slackware 10.2.
>>
>> I have found on the net that it is necessary to create file 
>> /etc/udev/scripts/dvb.sh that contains:
>>
>> #!/bin/sh
>> /bin/echo $1 | /bin/sed -e 
>> 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,'
>> #end of script
>>
>> This I have done. However, I believe that the problem occurs before udev 
>> runs, as /sys/class/dvb is empty.
>>
>> Here is more doc, and thanks in advance.
>> Garnet MacPhee
>>
>> ---------------------------------------------------------------------------------------
>>
>> lspci -v
>> 02:05.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and 
>> Audio Decoder (rev 05)
>>         Subsystem: KWorld Computer Co. Ltd.: Unknown device 08b2
>>         Flags: bus master, medium devsel, latency 32, IRQ 10
>>         Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
>>         Capabilities: [44] Vital Product Data
>>         Capabilities: [4c] Power Management version 2
>>
>> 02:05.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio 
>> Decoder [MPEG Port] (rev 05)
>>         Subsystem: KWorld Computer Co. Ltd.: Unknown device 08b2
>>         Flags: bus master, medium devsel, latency 32, IRQ 10
>>         Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
>>         Capabilities: [4c] Power Management version 2
>>
>> --------------------------------------------------------------------------------------------
>>
>> dmesg
>> Linux version 2.6.16-rc6 (root at default) (gcc version 3.3.6) #1 Tue Mar 14 
>> 13:15:35 MST 2006
>> --------------------------------------------snip------------------------------------------
>> Linux video capture interface: v1.00
>> cx2388x v4l2 driver version 0.0.5 loaded
>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>> PCI: setting IRQ 10 as level-triggered
>> ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 10 (level, 
>> low) -> IRQ 10
>> CORE cx88[0]: subsystem: 17de:08b2, board: KWorld DVB-S 100 
>> [card=39,autodetected]
>> TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
>> cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 10, latency: 32, mmio: 
>> 0xfc000000
>> cx88[0]/0: registered device video0 [v4l2]
>> cx88[0]/0: registered device vbi0
>> set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
>> set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
>> set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
>> set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
>> set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
>> set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
>> set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]
>> cx2388x blackbird driver version 0.0.5 loaded
>> cx2388x dvb driver version 0.0.5 loaded
>> ACPI: PCI Interrupt 0000:02:05.2[A] -> Link [LNKB] -> GSI 10 (level, 
>> low) -> IRQ 10
>> cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 10, latency: 32, mmio: 
>> 0xfd000000
>> cx88[0]/2: cx2388x based dvb card
>> DVB: registering new adapter (cx88[0]).
>> DVB: registering frontend 0 (Conexant CX24123/CX24109)...
>>
>> ---------------------------------------------------------------------------------------------
>>
>> .config
>> #
>> # Automatically generated make config: don't edit
>> # Linux kernel version: 2.6.16-rc6
>> # Tue Mar 14 13:10:36 2006
>> #
>> -----------------------snip--------------------------
>> #
>> # I2C support
>> #
>> CONFIG_I2C=y
>> CONFIG_I2C_CHARDEV=y
>>
>> #
>> # I2C Algorithms
>> #
>> CONFIG_I2C_ALGOBIT=y
>> # CONFIG_I2C_ALGOPCF is not set
>> # CONFIG_I2C_ALGOPCA is not set
>>
>> #
>> # I2C Hardware Bus support
>> #
>> # CONFIG_I2C_ALI1535 is not set
>> # CONFIG_I2C_ALI1563 is not set
>> # CONFIG_I2C_ALI15X3 is not set
>> # CONFIG_I2C_AMD756 is not set
>> # CONFIG_I2C_AMD8111 is not set
>> CONFIG_I2C_I801=y
>> # CONFIG_I2C_I810 is not set
>> # CONFIG_I2C_PIIX4 is not set
>> # CONFIG_I2C_NFORCE2 is not set
>> # CONFIG_I2C_PARPORT_LIGHT is not set
>> # CONFIG_I2C_PROSAVAGE is not set
>> # CONFIG_I2C_SAVAGE4 is not set
>> # CONFIG_SCx200_ACB is not set
>> # CONFIG_I2C_SIS5595 is not set
>> # CONFIG_I2C_SIS630 is not set
>> # CONFIG_I2C_SIS96X is not set
>> # CONFIG_I2C_VIA is not set
>> # CONFIG_I2C_VIAPRO is not set
>> # CONFIG_I2C_VOODOO3 is not set
>> # CONFIG_I2C_PCA_ISA is not set
>>
>> #
>> # Miscellaneous I2C Chip support
>> #
>> # CONFIG_SENSORS_DS1337 is not set
>> # CONFIG_SENSORS_DS1374 is not set
>> # CONFIG_SENSORS_EEPROM is not set
>> # CONFIG_SENSORS_PCF8574 is not set
>> # CONFIG_SENSORS_PCA9539 is not set
>> # CONFIG_SENSORS_PCF8591 is not set
>> # CONFIG_SENSORS_RTC8564 is not set
>> # CONFIG_SENSORS_MAX6875 is not set
>> # CONFIG_RTC_X1205_I2C is not set
>> # CONFIG_I2C_DEBUG_CORE is not set
>> # CONFIG_I2C_DEBUG_ALGO is not set
>> # CONFIG_I2C_DEBUG_BUS is not set
>> # CONFIG_I2C_DEBUG_CHIP is not set
>>
>> -------------------------------snip------------
>> #
>> # Multimedia devices
>> #
>> CONFIG_VIDEO_DEV=y
>>
>> #
>> # Video For Linux
>> #
>>
>> #
>> # Video Adapters
>> #
>> CONFIG_VIDEO_ADV_DEBUG=y
>> # CONFIG_VIDEO_BT848 is not set
>> # CONFIG_VIDEO_CPIA is not set
>> # CONFIG_VIDEO_SAA5246A is not set
>> # CONFIG_VIDEO_SAA5249 is not set
>> # CONFIG_TUNER_3036 is not set
>> # CONFIG_VIDEO_STRADIS is not set
>> # CONFIG_VIDEO_ZORAN is not set
>> # CONFIG_VIDEO_SAA7134 is not set
>> # CONFIG_VIDEO_MXB is not set
>> # CONFIG_VIDEO_DPC is not set
>> # CONFIG_VIDEO_HEXIUM_ORION is not set
>> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
>> CONFIG_VIDEO_CX88=y
>> CONFIG_VIDEO_CX88_DVB=y
>> # CONFIG_VIDEO_CX88_ALSA is not set
>> # CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS is not set
>> # CONFIG_VIDEO_CX88_DVB_MT352 is not set
>> # CONFIG_VIDEO_CX88_DVB_OR51132 is not set
>> # CONFIG_VIDEO_CX88_DVB_CX22702 is not set
>> # CONFIG_VIDEO_CX88_DVB_LGDT330X is not set
>> # CONFIG_VIDEO_CX88_DVB_NXT200X is not set
>> CONFIG_VIDEO_CX88_DVB_CX24123=y
>> # CONFIG_VIDEO_OVCAMCHIP is not set
>> # CONFIG_VIDEO_AUDIO_DECODER is not set
>> # CONFIG_VIDEO_DECODER is not set
>>
>> #
>> # Radio Adapters
>> #
>> # CONFIG_RADIO_GEMTEK_PCI is not set
>> # CONFIG_RADIO_MAXIRADIO is not set
>> # CONFIG_RADIO_MAESTRO is not set
>>
>> #
>> # Digital Video Broadcasting Devices
>> #
>> CONFIG_DVB=y
>> CONFIG_DVB_CORE=y
>>
>> #
>> # Supported SAA7146 based PCI Adapters
>> #
>> # CONFIG_DVB_AV7110 is not set
>> # CONFIG_DVB_BUDGET is not set
>> # CONFIG_DVB_BUDGET_CI is not set
>> # CONFIG_DVB_BUDGET_AV is not set
>>
>> #
>> # Supported FlexCopII (B2C2) Adapters
>> #
>> # CONFIG_DVB_B2C2_FLEXCOP is not set
>>
>> #
>> # Supported BT878 Adapters
>> #
>>
>> #
>> # Supported Pluto2 Adapters
>> #
>> # CONFIG_DVB_PLUTO2 is not set
>>
>> #
>> # Supported DVB Frontends
>> #
>>
>> #
>> # Customise DVB Frontends
>> #
>>
>> #
>> # DVB-S (satellite) frontends
>> #
>> # CONFIG_DVB_STV0299 is not set
>> # CONFIG_DVB_CX24110 is not set
>> CONFIG_DVB_CX24123=y
>> # CONFIG_DVB_TDA8083 is not set
>> # CONFIG_DVB_MT312 is not set
>> # CONFIG_DVB_VES1X93 is not set
>> # CONFIG_DVB_S5H1420 is not set
>>
>> #
>> # DVB-T (terrestrial) frontends
>> #
>> # CONFIG_DVB_SP8870 is not set
>> # CONFIG_DVB_SP887X is not set
>> # CONFIG_DVB_CX22700 is not set
>> # CONFIG_DVB_CX22702 is not set
>> # CONFIG_DVB_L64781 is not set
>> # CONFIG_DVB_TDA1004X is not set
>> # CONFIG_DVB_NXT6000 is not set
>> # CONFIG_DVB_MT352 is not set
>> # CONFIG_DVB_DIB3000MB is not set
>> # CONFIG_DVB_DIB3000MC is not set
>>
>> #
>> # DVB-C (cable) frontends
>> #
>> # CONFIG_DVB_VES1820 is not set
>> # CONFIG_DVB_TDA10021 is not set
>> # CONFIG_DVB_STV0297 is not set
>>
>> #
>> # ATSC (North American/Korean Terresterial DTV) frontends
>> #
>> # CONFIG_DVB_NXT200X is not set
>> # CONFIG_DVB_OR51211 is not set
>> # CONFIG_DVB_OR51132 is not set
>> # CONFIG_DVB_BCM3510 is not set
>> # CONFIG_DVB_LGDT330X is not set
>> CONFIG_VIDEO_TUNER=y
>> CONFIG_VIDEO_BUF=y
>> CONFIG_VIDEO_BUF_DVB=y
>> CONFIG_VIDEO_BTCX=y
>> CONFIG_VIDEO_IR=y
>> CONFIG_VIDEO_TVEEPROM=y
>> -----------------------------------snip--------------------
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb at linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 




More information about the linux-dvb mailing list