[linux-dvb] DVICO FusionHDTV+ difficulites

[Ben Lowndes]

Hi,

I've got a DVICO FusionHD DVB-T Plus card that I'm struggling to get
working on Ubuntu 5.10. I'm a relative Linux n00b, so any advice is
appreciated.
Here's what I've been trying following lots of googling:

I've upgraded the kernel to 2.6.16 as I understand there maybe
problems with the driver in the 2.6.12 kernel Ubuntu comes with.

I've been trying  various loading and unloading of the modules using
lsmod, rmmod and modprobe-cx88-dvb.

I've tried creating a file referencing the card in /etc/modprobe/ with
the contents "options cx88xx card=21"

But none of this seems to be working. What follows is a dump of dmesg
and then lsmod. I'm hoping someone can look at this and point me in
the right direction:

Thanks!

dmesg:
[17179596.980000] Linux video capture interface: v1.00
[17179597.096000] cx2388x v4l2 driver version 0.0.5 loaded
[17179597.100000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179597.100000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1]
-> GSI 16 (level, high) -> IRQ 20
[17179597.100000] CORE cx88[0]: subsystem: 18ac:db10, board: DViCO
FusionHDTV DVB-T Plus [card=21,insmod option]
[17179597.100000] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
[17179597.328000] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 20,
latency: 32, mmio: 0xe2000000
[17179597.328000] cx88[0]/0: registered device video0 [v4l2]
[17179597.360000] cx88[0]/0: registered device vbi0
[17179597.360000] set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
[17179597.360000] set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
[17179597.360000] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
[17179597.360000] set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
[17179597.360000] set_control id=0x980909 reg=0x320594 val=0x40 (mask
0x40) [shadowed]
[17179597.360000] set_control id=0x980905 reg=0x320594 val=0x20 (mask
0x3f) [shadowed]
[17179597.360000] set_control id=0x980906 reg=0x320598 val=0x40 (mask
0x7f) [shadowed]
[17179597.620000] cx2388x dvb driver version 0.0.5 loaded
[17179597.624000] ACPI: PCI Interrupt 0000:01:08.2[A] -> Link [APC1]
-> GSI 16 (level, high) -> IRQ 20
[17179597.624000] cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 20,
latency: 32, mmio: 0xe3000000
[17179597.624000] cx88[0]/2: cx2388x based dvb card
[17179597.628000] cx88[0]: frontend initialization failed
[17179597.628000] cx88[0]/2: cx8802_stop_dma
[17179597.628000] ACPI: PCI interrupt for device 0000:01:08.2 disabled
[17179597.628000] cx88-dvb: probe of 0000:01:08.2 failed with error -1
[17179597.700000] cx2388x blackbird driver version 0.0.5 loaded

lsmod:
cx88_blackbird         17948  0
cx88_dvb               11780  0
cx8802                 10884  2 cx88_blackbird,cx88_dvb
cx88_vp3054_i2c         4224  1 cx88_dvb
mt352                   5892  1 cx88_dvb
or51132                 9220  1 cx88_dvb
video_buf_dvb           6148  1 cx88_dvb
dvb_core               71488  1 video_buf_dvb
nxt200x                12036  1 cx88_dvb
firmware_class          9856  3 cx88_blackbird,or51132,nxt200x
cx24123                 8068  1 cx88_dvb
lgdt330x                7324  1 cx88_dvb
cx22702                 5892  1 cx88_dvb
dvb_pll                11396  4 cx88_dvb,or51132,nxt200x,cx22702
cx8800                 29196  1 cx88_blackbird
cx88xx                 60196  4 cx88_blackbird,cx88_dvb,cx8802,cx8­ 800
i2c_algo_bit            8456  2 cx88_vp3054_i2c,cx88xx
video_buf              20228  6 cx88_blackbird,cx88_dvb,cx8802,vid­
eo_buf_dvb,cx8800,cx88xx
ir_common               9476  1 cx88xx
tveeprom               13840  1 cx88xx
compat_ioctl32          1408  1 cx8800
v4l1_compat            12292  1 cx8800
v4l2_common             7680  2 cx88_blackbird,cx8800
btcx_risc               4744  3 cx8802,cx8800,cx88xx
videodev                8960  3 cx88_blackbird,cx8800,cx88xx