[linux-dvb] freecom USB dvb-t -- new vendor/product ID 14aa:022a
mikel.martin at gmail.com
Mon Mar 27 21:47:01 CEST 2006
The driver is asking for dvb-usb-wt220u-zl0353-01.fw. Where shuold I find
> -----Mensaje original-----
> De: Patrick Boettcher [mailto:patrick.boettcher at desy.de]
> Enviado el: lunes, 27 de marzo de 2006 20:27
> Para: Mikel Martin
> CC: linux-dvb at linuxtv.org
> Asunto: RE: [linux-dvb] freecom USB dvb-t -- new
> vendor/product ID 14aa:022a
> Hi Mikel,
> Please try the attached firmware and patch (along with latest
> v4l-dvb hg).
> You don't need to load the zl0353-driver, dvb-usb-dtt200u and
> its dependencies is sufficient.
> Please report the result,
> Mail: patrick.boettcher at desy.de
> WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
> On Mon, 27 Mar 2006, Mikel Martin wrote:
> > Hi Patrick,
> > Thanks a lot for your interest. I can't do what you ask
> yet because I
> > don't have the dual boot nor the vmware for linux.
> > Playing with the dvb-usb-ids.h to force different firmwares to be
> > downloaded to the stick. I've found the following:
> > In windows when I plug the stick it's led blinks for a
> while (while
> > the Loader is present) and the the led goes on and stops blinking.
> > (The Receiver is present now)
> > In linux if I force to download the dvb-usb-wt220u-01.fw or
> > dvb-usb-wt220u-02.fw the sticks's led blinks, but if I force to
> > download any other the led doesn't switch on. Perhaps this
> information could help.
> > Apart from this, which is the mecanism used to choose which driver
> > should be used? If both modules are installed, zl10353.ko and the
> > dvb-usb-dtt200u.ko which one would be used?
> > Regards,
> > Mikel
More information about the linux-dvb