[linux-dvb] device 15f4:0024 HanfTek ?

coding at shaltev.org coding at shaltev.org
Thu Nov 2 16:29:41 CET 2006


hi @ all

i am not sure, if this questions belong here, so if not sorry @ all,

i have a videa dtv-100 usb 2.0 dvb-t box (www.videa-teach.com),
if used under windows and not discontected before linux boot:
 
lsusb: 

Bus 003 Device 002: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus]
Bus 003 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 15f4:0024 HanfTek 
Bus 005 Device 002: ID 04cc:1122 Philips Semiconductors Hub
Bus 005 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000

if dis- and reconnect , than lsusb:

Bus 003 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 001 Device 005: ID 167e:0100  
Bus 001 Device 001: ID 0000:0000  
Bus 005 Device 002: ID 04cc:1122 Philips Semiconductors Hub
Bus 005 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  

i tried to load: 

   mt352.ko
  dvb-usb.ko
  dvb-usb-dibusb-common.ko
  dvb-usb-umt-010.ko

but /dev/dvb blah,, blah was not created (if i load the modules for my dvb-s 
card , twinhan, the dev files appears, and dvb-s works)

any ideas?

thank you!

mirsha

p.s.1 i send an email to videa support, but no answer so far :(

p.s.2 some box specifications:

COFDM & FEC {
	Fully DVB-T Compliant
	2K or 8K FFT Size
	Punctured Codes: 1/2, 2/3, 3/4, 4/5, 5/6 and 7/8
	Bandwidth: 6/7/8 MHz Auto Select
}

Demultiplexing: {
	Max No. Section filtering: 32PIDs
	Engine: Hardware
	Stream capture: PES & TS
}

A/V Format {
	Video format: MPEG-II Main Profile & Main Level
	Audio format: MPEG-II Audio layer I & II
}

Modulation {
	QPSK, 16QAM or 64QAM
}

--
SHALTEV.ORG @ http://www.shaltev.org



More information about the linux-dvb mailing list