[linux-dvb] FC6 & Twinhan 1025, drivers won't compile

Ray Clouse rclouse at gmail.com
Thu Nov 2 18:30:07 CET 2006


I upgraded my FC4 based PVR to Fedora Core 6.  It was rumored the DVB
drivers for the Twinhan 1025 would be in the kernel (2.6.18), but it doesn't
create a frontend, just a dvb0 device.  Here's what dmesg reports:

bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high)
-> IRQ 217
bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 217, latency: 32, mmio:
0xdc000000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00d500ff [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"

When I try to make drivers, I get the "linux/config.h not found" error:

sat:~/tmp/v4l-dvb 26$make
make -C /usr/local/people/clouse/tmp/v4l-dvb/v4l
make[1]: Entering directory `/usr/local/people/clouse/tmp/v4l-dvb/v4l'
creating symbolic links...
make -C /lib/modules/2.6.18-1.2798.fc6/build
SUBDIRS=/usr/local/people/clouse/tmp/v4l-dvb/v4l  modules
make[2]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
  CC [M]  /usr/local/people/clouse/tmp/v4l-dvb/v4l/flexcop-pci.o
In file included from /usr/local/people/clouse/tmp/v4l-dvb/v4l/compat.h:13,
                 from /usr/local/people/clouse/tmp/v4l-dvb/v4l/flexcop-
common.h:12,
                 from /usr/local/people/clouse/tmp/v4l-dvb/v4l/flexcop-pci.c
:10:/usr/local/people/clouse/tmp/v4l-dvb/v4l/config-compat.h:4:26: error:
linux/config.h: No such file or directory
make[3]: *** [/usr/local/people/clouse/tmp/v4l-dvb/v4l/flexcop-pci.o] Error
1
make[2]: *** [_module_/usr/local/people/clouse/tmp/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/usr/local/people/clouse/tmp/v4l-dvb/v4l'
make: *** [all] Error 2

The stuff necessary for building is installed:

[root at sat ~]# rpm -qa | grep kernel | sort
kernel-2.6.18-1.2798.fc6
kernel-devel-2.6.18-1.2798.fc6
kernel-headers-2.6.18-1.2798.fc6

When will the drivers be updated for FC6?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20061102/05a76e59/attachment-0001.htm


More information about the linux-dvb mailing list