[linux-dvb] Mantis VP-1027/VP-1033/VP-1034/VP-2033/VP-3033

Marko Ristola marko.ristola at kolumbus.fi
Sat Nov 4 14:12:16 CET 2006


Hi Joachim,

With nquite and with cu1216 frontend
there might be similar bugs.
I had first a "no frontend" problem with mantis:

dmesg | grep -i mantis
"mantis: Unknown symbol cu1216_attach"

This cu1216_attach symbol problem was the
root of that problem.

I fixed it by copying frontend module file cu1216.ko by hand like this:

My kernel:
#uname -r
2.6.18-1.2798.fc6

So the correct path is /lib/modules/2.6.18-1.2798.fc6:

#cd mantis-xxx
#make
#cp v4l/cu1216.ko 
/lib/modules/2.6.18-1.2798.fc6/kernel/drivers/media/dvb/mantis/
#make install
#reboot

After reboot, the frontend might be found.

Regards,
Marko Ristola

Joachim Holst wrote:
> Hi!
>
> I've been playing around with the above driver. Not sure I've got the latest 
> one though :-(
>
> I'm using a VP-3030 card and Mantis loads nquite nice giving me demux and 
> stuff. Problem is I don't get a frontend for it and the driver complains 
> about no frontend available.
>   
> Very best regards,
> Joachim Holst
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>   



More information about the linux-dvb mailing list