[linux-dvb] 2.6.18 patch for SATELCO EasyWatch PCI (DVB-C)

Thomas Hamm thhamm at t-online.de
Sun Nov 5 10:33:58 CET 2006


Hi!

I recently bought a SATELCO EasyWatch PCI (DVB-C) card.
http://www.satelco.de/htm/shop/easywatch_pci/index.htm

lspci:

02:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: Unknown device 1894:002a
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at feafe000 (32-bit, non-prefetchable) [size=512]

Its a saa7146 with TDA10021 frontend, so i just added some #define and
case: for the appropriate pci-id.

Don´t know if its all correct, but it works pretty good here.

--- linux/drivers/media/dvb/ttpci/budget-av.c   Wed Sep 20 05:42:06 2006
+++ /usr/src/linux/drivers/media/dvb/ttpci/budget-av.c  Fri Oct  6
11:57:49 2006
@@ -1051,6 +1051,7 @@
 #define SUBID_DVBS_TV_STAR_CI  0x0016
 #define SUBID_DVBS_EASYWATCH_1  0x001a
 #define SUBID_DVBS_EASYWATCH   0x001e
+#define SUBID_DVBC_EASYWATCH   0x002a
 #define SUBID_DVBC_KNC1                0x0020
 #define SUBID_DVBC_KNC1_PLUS   0x0021
 #define SUBID_DVBC_CINERGY1200 0x1156
@@ -1089,7 +1090,8 @@
                case SUBID_DVBS_KNC1_PLUS:
                case SUBID_DVBC_KNC1_PLUS:
                case SUBID_DVBT_KNC1_PLUS:
-                       saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
+               case SUBID_DVBC_EASYWATCH:
+                       saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
                        break;
        }
 
@@ -1152,6 +1154,7 @@
 
        case SUBID_DVBC_KNC1_PLUS:
        case SUBID_DVBC_CINERGY1200:
+        case SUBID_DVBC_EASYWATCH:
                budget_av->reinitialise_demod = 1;
                fe = tda10021_attach(&philips_cu1216_config,
                                     &budget_av->budget.i2c_adap,
@@ -1387,6 +1390,7 @@
 MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
 MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light",
BUDGET_TVSTAR);
 MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light",
BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco Easywatch DVB-C", BUDGET_KNC1CP);
 MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
 MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
 MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
@@ -1404,6 +1408,7 @@
        MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
        MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
        MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+       MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
        MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
        MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
        MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),





More information about the linux-dvb mailing list