[linux-dvb] How does my card send diseqc commands ?

Andrew de Quincey adq_dvb at lidskialf.net
Sun Nov 19 21:17:01 CET 2006


On Sunday 19 November 2006 19:20, Gregoire Favre wrote:
> On Sun, Nov 19, 2006 at 06:46:07PM +0000, Andrew de Quincey wrote:
> > OK, well the two FF cards have different frontends on them, which is a
> > lead... next, can you tell me which adapter has the DISEQC problem?
>
> Well, with -D0 VDR works pretty well :)
> But with -D1 only first sat seems to work, so it's the second card.
>
> If I unload/reload the driver :
> saa7146: register extension 'dvb'.
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
> saa7146: found saa7146 @ mem ffffc2000007ce00 (revision 1, irq 17)
> (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV
> DVB-S rev1.X or Fujitsu Siemens DVB-C). adapter has MAC addr =
> 00:d0:5c:00:41:90
> dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app
> 80f22623 dvb-ttpci: firmware @ card 0 supports CI link layer interface
> dvb-ttpci: adac type set to 0 @ card 0
> saa7146_vv: saa7146 (0): registered device video0 [v4l2]
> saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
> ves1x93: Detected ves1893a rev2
> DVB: registering frontend 0 (VLSI VES1x93 DVB-S)...
> input: DVB on-card IR receiver as /class/input/input11
> dvb-ttpci: found av7110-0.
> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19
> saa7146: found saa7146 @ mem ffffc200002aaa00 (revision 1, irq 19)
> (0x13c2,0x0000). DVB: registering new adapter (Technotrend/Hauppauge WinTV
> DVB-S rev1.X or Fujitsu Siemens DVB-C). adapter has MAC addr =
> 00:d0:5c:1f:50:c8
> dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app
> 80f22623 dvb-ttpci: firmware @ card 1 supports CI link layer interface
> dvb-ttpci: adac type set to 0 @ card 1
> saa7146_vv: saa7146 (1): registered device video1 [v4l2]
> saa7146_vv: saa7146 (1): registered device vbi1 [v4l2]
> ves1x93: Detected ves1893a rev2
> DVB: registering frontend 1 (VLSI VES1x93 DVB-S)...
> dvb-ttpci: found av7110-1.
> saa7146: register extension 'budget_ci dvb'.
> ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
> saa7146: found saa7146 @ mem ffffc20000440c00 (revision 1, irq 18)
> (0x13c2,0x100f). saa7146 (2): dma buffer size 192512
> DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
> adapter has MAC addr = 00:d0:5c:23:a3:9b
> input: Budget-CI dvb ir receiver saa7146 (2) as /class/input/input12
> DVB: registering frontend 2 (ST STV0299 DVB-S)...
>
> I don't see where it prints the frontend are different ?

Gah, you're right, I misread the dmesg; they're the same. What if you swap the 
two FF cards round? Does the first card then start failing DISEQC?



More information about the linux-dvb mailing list