[linux-dvb] Twinhan VP-1022A version 2.0

Manu Abraham abraham.manu at gmail.com
Sat Nov 25 11:52:23 CET 2006


Marius van den Beek wrote:
> victor.noname at gmail.com wrote:
>> Snapshot of linuxtv from 12.11.06, linux kernel 2.6.17
>> ---------------dmesg-----------------------------------------------------------
>>
>> Linux video capture interface: v2.00
>> bttv: driver version 0.9.16 loaded
>> bttv: snapshot date 2006-07-17
>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>> bttv: Bt8xx card found (0).
>> PCI: Found IRQ 15 for device 0000:00:0a.0
>> PCI: Sharing IRQ 15 with 0000:00:0c.0
>> PCI: Sharing IRQ 15 with 0000:00:0a.1
>> bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 15, latency: 32, mmio:
>> 0xd7401000
>> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID
>> is 1822:000
>> 1
>> bttv0: using: Twinhan DST + clones [card=113,insmod option]
>> bttv0: gpio: en=00000000, out=00000000 in=00f500fe [init]
>> bttv0: using tuner=4
>> bttv0: add subdevice "dvb0"
>> bt878: AUDIO driver version 0.0.0 loaded
>> bt878: Bt878 AUDIO function found (0).
>> PCI: Found IRQ 15 for device 0000:00:0a.1
>> PCI: Sharing IRQ 15 with 0000:00:0c.0
>> PCI: Sharing IRQ 15 with 0000:00:0a.0
>> bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB
>> functions.
>> bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 15, latency: 32, memory:
>> 0xd7402000
>> DVB: registering new adapter (bttv0).
>> dst(0) dst_comm_init: Initializing DST.
>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
>> dst(0) rdc_reset_state: Resetting state machine
>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
>> writing [ 00 06 00 00 00 00 00 fa ]
>> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
>> dst(0) dst_error_recovery: Trying to return from previous errors.
>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>> dst(0) read_dst: reply is 0xff
>> dst(0) dst_wait_dst_ready: dst wait ready after 1
>> dst(0) read_dst: reply is 0x6
>>  0x1b 0x16 0x3d 0x30 0x33 0x5c 0x39
>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>> dst(0) dst_get_device_id: Checksum failure!
>> dst(0) dst_probe: unknown device.
>> frontend_init: Could not find a Twinhan DST.
>> dvb-bt8xx: A frontend driver was not found for device 109e/0878
>> subsystem 1822/0001
>> ---------------dmesg
>> end-------------------------------------------------------
>>
>> This card currently is not supported at all :-(

Will take a look at the problem.


Manu



More information about the linux-dvb mailing list