[linux-dvb] Re: Pinnacle PCTV HD Pro Stick

Markus Rechberger mrechberger at gmail.com
Mon Nov 27 10:46:01 CET 2006


On 11/27/06, Chris Lawrence <lordsutch at gmail.com> wrote:
> On 11/27/06, Markus Rechberger <mrechberger at gmail.com> wrote:
> > ok that's  just what I thought..
> > can you retry with the repository on
> > http://mcentral.de/hg/~mrec/v4l-dvb-kernel
>
> That did it:
>
> [ 2511.230000] Linux video capture interface: v2.00
> [ 2511.237000] em28xx v4l2 driver version 0.0.1 loaded
> [ 2511.237000] em28xx new video device (2304:0227): interface 0, class 255
> [ 2511.237000] em28xx #0: Alternate settings: 8
> [ 2511.237000] em28xx #0: Alternate setting 0, max size= 0
> [ 2511.237000] em28xx #0: Alternate setting 1, max size= 0
> [ 2511.237000] em28xx #0: Alternate setting 2, max size= 1448
> [ 2511.237000] em28xx #0: Alternate setting 3, max size= 2048
> [ 2511.237000] em28xx #0: Alternate setting 4, max size= 2304
> [ 2511.237000] em28xx #0: Alternate setting 5, max size= 2580
> [ 2511.237000] em28xx #0: Alternate setting 6, max size= 2892
> [ 2511.237000] em28xx #0: Alternate setting 7, max size= 3072
> [ 2511.374000] Tuner: registering extension (Xceive 3028 Tuner)
> [ 2511.691000] attach_inform: eeprom detected.
> [ 2511.720000] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12
> 5c 03 8e 16 a4 1c
> [ 2511.720000] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00
> 00 00 00 00 00 00
> [ 2511.720000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00
> 00 00 5b 1c 00 00
> [ 2511.720000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01
> 00 00 00 00 00 00
> [ 2511.720000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
> 24 03 50 00 69 00
> [ 2511.721000] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00
> 65 00 20 00 53 00
> [ 2511.721000] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00
> 73 00 00 00 16 03
> [ 2511.721000] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00
> 38 00 30 00 30 00
> [ 2511.721000] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00
> 30 00 38 00 30 00
> [ 2511.721000] em28xx #0: i2c eeprom b0: 31 00 30 00 30 00 38 00 32 00
> 37 00 38 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00
> [ 2511.721000] EEPROM ID= 0x9567eb1a
> [ 2511.721000] Vendor/Product ID= 2304:0227
> [ 2511.721000] AC97 audio (5 sample rates)
> [ 2511.721000] 500mA max power
> [ 2511.721000] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
> [ 2511.725000] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
> [ 2511.725000] attach inform (default): detected I2C address c2
> [ 2511.735000] Tuner: setting up tuner core extension for: Xceive 3028 Tuner
> [ 2511.736000] Loading base firmware: xc3028_init0.i2c.fw
> [ 2512.874000] Loading default analogue TV settings:
> xc3028_BG_PAL_A2_A.i2c.fw
> [ 2513.099000] attach_inform: tvp5150 detected.
> [ 2513.132000] em28xx #0: found i2c device @ 0xa0 [eeprom]
> [ 2513.136000] em28xx #0: found i2c device @ 0xb8 [tvp5150a]
> [ 2513.138000] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
> [ 2513.150000] em28xx-video.c: requesting em28xx-audio!
> [ 2513.150000] em28xx-video.c: requesting em2880-dvb!
> [ 2513.156000] em28xx #0: V4L2 device registered as /dev/video0
> [ 2513.156000] em28xx #0: Found Pinnacle PCTV HD Pro (Hybrid)
> [ 2513.156000] usbcore: registered new driver em28xx
>
> Incidentally, I've had no luck with tvtime since using the v4
> firmware... there are no obvious error messages in dmesg, but it
> happens after loading the MN_NTSCPAL_A2 firmware:
>
> [ 2811.454000] xc3028_set_std, Loading specific configuration for
> requested mode xc3028_MN_NTSCPAL_A2.i2c.fw
>
> It doesn't hang the system... it just stops and doesn't do anything.
> The same problem occurs with kdetv.
>
> strace shows the freeze to be happening at
>
> ioctl(3, VIDIOC_DQBUF <unfinished ...>
>
> I can ^C out of it, at least.
>

And this still works with the old firmware?
(note do not load the dvb/atsc module, once you loaded it analogue TV
will be switched off there's no switching back mechanism implemented
for your device yet)

Markus



More information about the linux-dvb mailing list