[linux-dvb] DViCO Dual Digital 2 remote control

Nathan Webb nathanwebb at fastmail.fm
Sun Oct 1 15:14:21 CEST 2006


Hi,

Following on from suggestions by Michael Krufky in this list, I've
managed to get this tuner card working (thanks Mike!), almost perfectly.
The only problem now is that the remote isn't working.

The drivers appear to be loading correctly, so that the entries appear
in /proc/bus/input/devices and both /dev/input/event0 and event1 are
created.

However, nothing appears under 'cat /dev/input/event[0|1]' when I press
the buttons.  I've tried it under a windows partition, and it works
there, so it's not the hardware.  irrecord doesn't pick up anything
either (as you'd expect) when trying 'lircd -H dev/input
-d /dev/input/event[0|1]'.

Please help!  I really don't want to use windows just to be able to use
the remote!

On another note, does anyone know how to change IRQ priorities?  The
wireless card has been given a lower IRQ (even after physically swapping
slots), and the BIOS won't help.  Network traffic causes glitches :(

Thanks,
Nathan Webb




More information about the linux-dvb mailing list