[linux-dvb] Pinnacle 310i DVB-T, please try this patch

benoit.gogniat at free.fr benoit.gogniat at free.fr
Fri Oct 6 08:48:23 CEST 2006



Selon Hartmut Hackmann <hartmut.hackmann at t-online.de>:

> Hi, all
>
> First: thanks for testing.
>
> To sum up:
> Things seem to work, right?
> Just some comments:
> - It should not be necessary to set card and tuner type manually.
> - If no dvb devices are created, the reason most probably is that
>    the saa7134-dvb module is not loaded. This still needs to be done
>    separately.
> - This card needs the external firmware.
> - If you don't have an internal sound cable, you will need to load
>    the saa7134-oss or the saa7134-alsa module and route the sound
>    in user space as described in the wiki. This does *not* hold for
>    dvb-t.
> - The digital sound processing uses a sample rate of 32kHz, that's
>    right.
> - The card might have a sensitivity issue. The reason is that there
>    is an external RF amplifier on the board which is not handled by
>    the driver yet.
>
> Can i check the patch in?
>
> Best regards
>     Hartmut
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>


Hi,

just about firmware :
 You can find it at
"http://technotrend-online.com/download/software/217/tt_budget_217g.zip" and
NOT at "http://technotrend-online.com/new/217g/tt_budget_217g.zip" as it 's
qpecified in getfirmeware script.

regards,

Test on Ubuntu : kernel 2.6.15.25-386
[17181001.888000] Linux video capture interface: v2.00
[17181002.008000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17181002.008000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) ->
IRQ 177
[17181002.008000] saa7133[0]: found at 0000:00:06.0, rev: 208, irq: 177, latency
: 64, mmio: 0xdffff800
[17181002.008000] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [c
ard=101,autodetected]
[17181002.008000] saa7133[0]: board init: gpio is 600c000
[17181002.152000] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c
 55 d2 b2 92
[17181002.152000] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c
 25 f1 ff ff
[17181002.152000] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 31 98 ff 00 a6
 ff 21 00 c2
[17181002.152000] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 77
 03 1c 94 81
[17181002.152000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff
[17181002.152000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff
[17181002.152000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff
[17181002.152000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
 ff ff ff ff
[17181002.248000] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[17181002.296000] tuner 0-004b: setting tuner address to 61
[17181002.336000] tuner 0-004b: type set to tda8290+75a
[17181002.400000] saa7133[0]: registered device video0 [v4l2]
[17181002.404000] saa7133[0]: registered device vbi0
[17181002.404000] saa7133[0]: registered device radio0
[17181002.428000] saa7134 ALSA driver for DMA sound loaded
[17181002.428000] saa7133[0]/alsa: saa7133[0] at 0xdffff800 irq 177 registered a
s card -1


[17181107.364000] DVB: registering new adapter (saa7133[0]).
[17181107.364000] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

[17181168.276000] tda1004x: setting up plls for 48MHz sampling clock
[17181168.544000] tda1004x: found firmware revision 0 -- invalid
[17181168.544000] tda1004x: waiting for firmware upload...
[17181168.608000] tda1004x: no firmware upload (timeout or file not found?)
[17181168.608000] tda1004x: firmware upload failed      <--FUNNY !! WHY D'ONT
YOU SAY  IT BEFORE  ;-)

P.S. I Need to set up SECAM to L for the "tuner" module (for French TV)
----- Fin du message transféré -----





More information about the linux-dvb mailing list