[linux-dvb] Pinnacle 310i DVB-T, please try this patch

[Hartmut Hackmann]

Hi,

KevinLuX wrote:
> Hartmut Hackmann ha scritto:
> 
>> Hi, all
>>
>> First: thanks for testing.
>>
>> To sum up:
>> Things seem to work, right?
>> Just some comments:
>> - It should not be necessary to set card and tuner type manually.
>> - If no dvb devices are created, the reason most probably is that
>>   the saa7134-dvb module is not loaded. This still needs to be done
>>   separately.
>> - This card needs the external firmware.
>> - If you don't have an internal sound cable, you will need to load
>>   the saa7134-oss or the saa7134-alsa module and route the sound
>>   in user space as described in the wiki. This does *not* hold for
>>   dvb-t.
>> - The digital sound processing uses a sample rate of 32kHz, that's
>>   right.
>> - The card might have a sensitivity issue. The reason is that there
>>   is an external RF amplifier on the board which is not handled by
>>   the driver yet.
>>
>> Can i check the patch in?
>>
>> Best regards
>>    Hartmut
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb at linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>>
> Yes, for me it's all okay!
> But i think is better include support for Remote.
> In analog mode, kernel dump show input from remote, but in dvb mode no.
> I think that if is possible it's better include code part that manage 
> remote from saa7134 also
> in saa7134-dvb.
> Cheers.
> 
Hm, it would be very difficult for me to do more than basic remote
support. I don't have the card, so i can't even determine the codes.
The remote support should be independent of DVB and analog mode,
but Pinnacle once had a remote chip that conflicted with the
channel decoder.

Hartmut