[linux-dvb] Pinnacle 310i DVB-T, please try this patch
kevinlux at karondimonio.it
Sat Oct 7 14:28:13 CEST 2006
Hartmut Hackmann ha scritto:
> KevinLuX wrote:
>> Hartmut Hackmann ha scritto:
>>> Hi, all
>>> First: thanks for testing.
>>> To sum up:
>>> Things seem to work, right?
>>> Just some comments:
>>> - It should not be necessary to set card and tuner type manually.
>>> - If no dvb devices are created, the reason most probably is that
>>> the saa7134-dvb module is not loaded. This still needs to be done
>>> - This card needs the external firmware.
>>> - If you don't have an internal sound cable, you will need to load
>>> the saa7134-oss or the saa7134-alsa module and route the sound
>>> in user space as described in the wiki. This does *not* hold for
>>> - The digital sound processing uses a sample rate of 32kHz, that's
>>> - The card might have a sensitivity issue. The reason is that there
>>> is an external RF amplifier on the board which is not handled by
>>> the driver yet.
>>> Can i check the patch in?
>>> Best regards
>>> linux-dvb mailing list
>>> linux-dvb at linuxtv.org
>> Yes, for me it's all okay!
>> But i think is better include support for Remote.
>> In analog mode, kernel dump show input from remote, but in dvb mode no.
>> I think that if is possible it's better include code part that manage
>> remote from saa7134 also
>> in saa7134-dvb.
> Hm, it would be very difficult for me to do more than basic remote
> support. I don't have the card, so i can't even determine the codes.
> The remote support should be independent of DVB and analog mode,
> but Pinnacle once had a remote chip that conflicted with the
> channel decoder.
Why not, if u can write a basic support than i can try to complete with
codes and others with your indications!
More information about the linux-dvb