[linux-dvb] WinTV NOVA-T 500

Jose Alberto Reguero jareguero at telefonica.net
Tue Sep 12 18:55:42 CEST 2006


El Martes, 12 de Septiembre de 2006 14:36, escribió:
> Attached the firmware.
>
> Please report success or not to the list.
>
> Patrick.
>

Relevant parts of dmesg:

dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to 
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
DVB: registering frontend 0 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T).
DVB: registering frontend 1 (DiBcom 3000MC/P)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and 
connected.
usbcore: registered new driver dvb_usb_dib0700

But not good rsults with tzap:

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 770000000 Hz
video pid 0x0065, audio pid 0x0067
status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00001125 |
status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |
status 00 | signal ffff | snr 0000 | ber 001fffff | unc 00000000 |

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 850000000 Hz
video pid 0x05dd, audio pid 0x05de
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000019 |
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '/root/.tzap/channels.conf'
tuning to 858000000 Hz
video pid 0x012d, audio pid 0x012f
status 02 | signal 0000 | snr 0000 | ber 001fffff | unc 00000000 |
status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 000000c9 | FE_HAS_LOCK
status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00000cff | FE_HAS_LOCK
status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK
status 1a | signal 0000 | snr 0000 | ber 001fffff | unc 00001ff5 | FE_HAS_LOCK

Thanks.
Jose Alberto



More information about the linux-dvb mailing list