[linux-dvb] Skystar 2 Rev. 2.6D receiving no data
Stefan Lucke
stefan at lucke.in-berlin.de
Sat Sep 16 19:53:50 CEST 2006
Hi,
with my new skystar2 2.6D I've a problem when for some reason a reception from
for example Pro7 (astra 19.2e) gets in trouble. Vdr reports:
Sep 16 19:34:32 jarada jarada vdr: [14014] TS buffer on device 1 thread started (pid=13788, tid=14014)
Sep 16 19:34:33 jarada jarada vdr: [13792] frontend 0 lost lock on channel 1017, tp 212480
Sep 16 19:34:33 jarada jarada vdr: [13792] frontend 0 regained lock on channel 1017, tp 212480
Sep 16 19:34:53 jarada jarada vdr: [13792] frontend 0 lost lock on channel 1017, tp 212480
Sep 16 19:34:53 jarada jarada vdr: [13792] frontend 0 regained lock on channel 1017, tp 212480
When this happens, it is impossible to tune to other channels like ARD, .. .
Femon reports then for ARD: SNR 0xbfda 75% , BER = 0
Only restarting vdr resolves this issue.
The above situation applies to drivers from kernel 2.6.17.6 and to those pulled today via hg.
The driver for this PCI card dosn't seems to survive a S3 sleep state.
Needs unload/reload. USB cingeryT2 drivers survives S3 sleep.
lsmod:
Module Size Used by
stv0299 10120 1
b2c2_flexcop_pci 7704 0
b2c2_flexcop 28300 1 b2c2_flexcop_pci
radeon 109728 1
drm 62356 2 radeon
it87 18596 0
hwmon_vid 2816 1 it87
hwmon 2452 1 it87
eeprom 5520 0
i2c_isa 3456 1 it87
cinergyT2 12804 0
snd_cmipci 30592 1
snd_opl3_lib 9088 1 snd_cmipci
snd_hwdep 7044 1 snd_opl3_lib
snd_mpu401_uart 6528 1 snd_cmipci
snd_rawmidi 20256 1 snd_mpu401_uart
dvb_core 74536 3 stv0299,b2c2_flexcop,cinergyT2
firmware_class 8064 1 b2c2_flexcop
dvb_pll 11908 1 b2c2_flexcop
i2c_i801 7820 0
intel_agp 20252 1
agpgart 28208 2 drm,intel_agp
rtc 10932 1
sbp2 21640 0
ohci1394 31664 0
ieee1394 86964 2 sbp2,ohci1394
--
Stefan Lucke
More information about the linux-dvb
mailing list