[linux-dvb] SkyStar2

Salvatore De Paolis depaolis.salvatore at libero.it
Mon Apr 2 02:12:14 CEST 2007


Hi all
i'm having troubles trying to let it works my skystar2 card.

lspci -v
00:0a.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
chip / Technisat SkyStar2 DVB card (rev 02) Subsystem: Techsan Electronics Co
Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card Flags: slow devsel,
IRQ 193 Memory at d5800000 (32-bit, non-prefetchable) [disabled] [size=64K]
        I/O ports at b800 [disabled] [size=32]

dmesg | grep i2c
i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
b2c2-flexcop: i2c master_xfer failed
lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed

dmesg | grep b2c2
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
successfully b2c2-flexcop: reading of MAC address failed.
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter

I followed the wiki on linuxtv.org and downloaded the firmware
dvb-ttpci-01.fw-2622 and copied in /lib/firmware.

Regards

-- 
Salvatore De Paolis
GPG Public Key Id:		0x7D11B858
OS:		 GNU/Linux
Kernel:		 Linux debian 2.6.18-4-k7 i686
Email Client:	 Claws Mail version 2.8.1cvs80



More information about the linux-dvb mailing list