[linux-dvb] Frontend-problem with Twinhan VisionPlus

Andreas Nettsträter andi at flavorz.de
Wed Apr 11 15:17:07 CEST 2007


Hello,

i own a DVB-T Twinhan VisionPlus card and it used to work properly. But 
  for a few weeks a frontend cannot be found for this card. I think this 
coincide with a debian update using apt. I am not able to get the card 
back working. Here is the accordingly dmesg output, I am using a 2.6.18 
kernel with debian testing:

Linux video capture interface: v2.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: setting IRQ 14 as level-triggered
PCI: Found IRQ 14 for device 0000:00:0a.0
PCI: Sharing IRQ 14 with 0000:00:0a.1
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 14, latency: 64, mmio:
0xeb005000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fbcdfe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
input: i2c IR (Hauppauge) as /class/input/input0
ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-0/0-001a/ir0 [bt878 #0 
[hw]] cx2388x v4l2 driver version 0.0.6 loaded
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
PCI: Found IRQ 14 for device 0000:00:0a.1
PCI: Sharing IRQ 14 with 0000:00:0a.0
bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 14, latency: 64, memory:
0xeb006000
DVB: registering new adapter (bttv0).
dst(0) dst_probe: unknown device.
frontend_init: Could not find a Twinhan DST.
dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem
1822/0001

Any advice for me how to get the card back working?

Thanks!

Bye
Andi



More information about the linux-dvb mailing list