[linux-dvb] saa7146_i2c_writeout: timed out waiting for end of xfer

[Oliver Endriss]

Sigmund Augdal wrote:
> On Tuesday 17 July 2007 07:45, Oliver Endriss wrote:
> > Oliver Endriss wrote:
> > > Imho the interrupt processing was broken:
> > > - The first I2C interrupt should be used to wake-up the task.
> > >   It does not matter that it takes some time until ERR in IIC_STA
> > >   will be updated. We don't need it.
> > > - Interrupts must be acknowledged at the end of the ISR.
> > >
> > > @all
> > > Please test the attached patch.
> > > There shouldn't be any unexpected I2C interrupts anymore.
> >
> > Attached is an updated patch which does extended status checking.
> I've tried this patch on a box running 2.6.20 now for about a day and has not 
> yet seen any i2c timeouts with it. I have tried to stress the i2c bus a bit 
> by starting and stopping capture, retuning and browsing the MMI menus of the 
> CAM quite a lot. I did however not see any pattern in when the i2c timeouts 
> happened before applying the patch, so I can't possitivly confirm they are 
> all gone.

Ok, patch committed with minor modifications.

CU
Oliver

-- 
----------------------------------------------------------------
VDR Remote Plugin 0.3.9: http://www.escape-edv.de/endriss/vdr/
----------------------------------------------------------------