[linux-dvb] Hauppauge WinTV Nova-T Stick frontend problems

Simon Keimer skeimer at gmx.net
Sun Feb 4 16:26:47 CET 2007


hi again,

now I use linux 2.6.20-rc7-git3 and (nearly) nothing has changed.
When I plug in the stick, dmesg tells me the following:

dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a 
firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
**WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify 
physical device; fix it!
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick).
dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.

As you can see there is a warning about I2C and again no frintend has been 
registered by the stick's driver.

The USB ID of the stick is 7060, which is now recognized by the kernel.

Did anynone solve this?


Best Regards, Simon

> hi Darren,
>
> thank you for your reply.
>
> > My Nova-T stick (ID 2040:7050) requires mt2060, support for which is in
> > the v4l-dvb repository and 2.6.20-rc*; it looks like yours is also
> > supported.
> >
> > If you choose to use the repository, make sure that /lib/modules/`uname
> > -r`/kernel/drivers/media is moved out of the way and that no v4l or dvb
> > modules are loaded.
>
> mt2060 is already in 2.6.19 as you may see here :
>
> Module                  Size  Used by
> mt2060                  3204  0
> dvb_usb_dib0700         6920  0
> dvb_usb                11724  1 dvb_usb_dib0700
> dvb_core               56424  1 dvb_usb
> dvb_pll                 8004  1 dvb_usb
> dib3000mc               8452  1 dvb_usb_dib0700
> dibx000_common          1668  1 dib3000mc
>
> I have to load it manually but no change after that...
>
> I'll give the 2.6.20* a try.

-- 
Simon Keimer



More information about the linux-dvb mailing list